« previous next »
Pages: [1]

Author Topic: Dip  (Read 1437 times)

0 Members and 2 Guests are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Dip
« on: August 28, 2015, 10:46:37 pm »
I'm puttering away with some twisty billets. One has a dip right in the center of the limb. It will be in the fades area. It's about 1/2" deep now but once the edges of the limb are rounded off it will be at least 1/4-3/8" deep I guess. There is a small 1/4" knot in the center of it. It's the opposite of crown so all the tension is going to be on the edges. Is this going to be a big problem? I have a little leeway and could maybe get it closer into the handle. This would put it closer to the splice.
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Dip
« Reply #1 on: August 28, 2015, 11:04:50 pm »
Your going to want to really round those edges off Don.  If all the tension is just on both edges, whatever one is a little bit higher, it WILL fail there.
how wide is the bow?
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Dip
« Reply #2 on: August 28, 2015, 11:05:48 pm »
Inch and a half
Logged
Pages: [1]
« previous next »