« previous next »
Pages: [1]

Author Topic: unibond 800  (Read 6185 times)

0 Members and 1 Guest are viewing this topic.

Offline Aries

  • Member
  • Posts: 493
unibond 800
« on: August 27, 2015, 08:01:41 am »
I've been shopping around for this stuff. Seen it on three rivers and on a couple other websites like nelson paint. Before I order it I was gonna ask if dap weld wood is a possibility alternate, it says it is a formaldehyde based glue mix with water to activate. Are these glues similar at all? I can buy the dap weld wood at a home improvement store and won't have to pay out the wazoo for shipping.
Thanks guys.
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline Wooden Spring

  • Member
  • Posts: 437
Re: unibond 800
« Reply #1 on: August 27, 2015, 08:23:32 am »
Personally, I've never liked water based glues because they always shrink when they dry. A boat-builder friend of mine once recommended resorcinol, and I haven't used anything but that ever since. Amazon has got it for around $60 per quart, and you'll do a LOT of bows for a quart! This stuff is super strong, and isn't affected by heat, cold, water, nothing...  Great stuff - I had a backed ipe bow blow up once that was glued with this stuff, and it literally ripped chunks out of the ipe, but the glue joint itself never failed.
Logged
"Everything that moves shall be food for you..." Genesis 9:3

Offline Aries

  • Member
  • Posts: 493
Re: unibond 800
« Reply #2 on: August 27, 2015, 08:37:17 am »
I have heard unibond is a decent gap filler, which is good for me:-b
How is the resorcinol with small gaps.
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: unibond 800
« Reply #3 on: August 27, 2015, 10:18:46 am »
I've used Weldwood Plastic Resin on bow backings and handle glue ups and had good luck with it. It is very similar to Urac 158, which was the predecessor to Unibond. I first heard of Weldwood Plastic Resin from a guy named Alby from Italy, years ago here on PA and he made beautiful all wood lam bows. I'd say give it a try.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline LittleBen

  • Member
  • Posts: 190
Re: unibond 800
« Reply #4 on: August 27, 2015, 11:12:16 am »
Can anyone recommend a good source for resorcinol glue. I mean a reputable brand?
Logged

Offline Aries

  • Member
  • Posts: 493
Re: unibond 800
« Reply #5 on: August 27, 2015, 11:32:45 am »
The weld wood is a whole lot cheaper too  >:D Pat I'm gonna try it!
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

blackhawk

  • Guest
Re: unibond 800
« Reply #6 on: August 27, 2015, 12:32:56 pm »
Quote from: Aries on August 27, 2015, 11:32:45 am
The weld wood is a whole lot cheaper too  >:D Pat I'm gonna try it!

You must be a cheap a$$ like Pat  >:D ...but who isnt on this site  ;)  :laugh:
Logged

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: unibond 800
« Reply #7 on: August 27, 2015, 12:34:52 pm »
Quote from: Pat B on August 27, 2015, 10:18:46 am
I've used Weldwood Plastic Resin on bow backings and handle glue ups and had good luck with it. It is very similar to Urac 158, which was the predecessor to Unibond. I first heard of Weldwood Plastic Resin from a guy named Alby from Italy, years ago here on PA and he made beautiful all wood lam bows. I'd say give it a try.

Pat.  I believe you are talking about Alberto Giovanni, his username was Zioalby, and yes he made some excellent wood and horn bows.  I bought some of that Weldwood Plastic Resin a couple years ago but haven't had time to try it yet, have it stored in a cool dry place for now
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: unibond 800
« Reply #8 on: August 27, 2015, 12:41:32 pm »
Shipping is a killer due to its toxicity, but so are air gaps and crap glue lines. Unibond 800 is great at filling gaps and not slipping a bit.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Wooden Spring

  • Member
  • Posts: 437
Re: unibond 800
« Reply #9 on: August 27, 2015, 01:04:24 pm »
Quote from: Aries on August 27, 2015, 08:37:17 am
I have heard unibond is a decent gap filler, which is good for me:-b
How is the resorcinol with small gaps.

Resorcinol fills any gap that I've ever run across. It's not as good at gap filling as epoxies are, but it holds just as well, and it's easier to use.
Logged
"Everything that moves shall be food for you..." Genesis 9:3

Offline Wooden Spring

  • Member
  • Posts: 437
Re: unibond 800
« Reply #10 on: August 27, 2015, 01:06:07 pm »
Quote from: LittleBen on August 27, 2015, 11:12:16 am
Can anyone recommend a good source for resorcinol glue. I mean a reputable brand?

I use Aerodux Resorcinol by Spectrum. Amazon.com has it for $62 a quart.
Logged
"Everything that moves shall be food for you..." Genesis 9:3
Pages: [1]
« previous next »