« previous next »
Pages: [1] 2

Author Topic: Arrow Spinner/ Cresting Jig?  (Read 6462 times)

0 Members and 1 Guest are viewing this topic.

Offline Bearded Mountain Man

  • Member
  • Posts: 70
    • Waxhaw Survival Ware
Arrow Spinner/ Cresting Jig?
« on: August 17, 2015, 08:53:49 pm »
I found this arrow spinner sitting on the bottom shelf at the local Gun/Archery store in town today. She looks like she has been sitting there for about a decade or more, but still spins. She's missing a few parts, but I was hoping you all could help me figure out how to make what I need. I have never owned one before, but I am assuming I will need something to stabilize the arrow out at the other end while it spins. Oh yeah the best part is that the price tag says $89.95, but I walked away with it for $25.00! Can't wait to start doing some cresting.
Thanks,
       Mountain Man
« Last Edit: August 17, 2015, 09:54:15 pm by Bearded Mountan Man »
Logged
"As if you could kill time without injuring eternity" -Henry David Thoreau

Offline punch

  • Member
  • Posts: 100
Re: Arrow Spinner?
« Reply #1 on: August 17, 2015, 09:04:17 pm »
I have a newer one but it looks similar.  The only thing you are missing is a block with a "V" to stabilize the arrows.  Well that's how mine works. I can take a photo when I get home
Logged

Offline Bearded Mountain Man

  • Member
  • Posts: 70
    • Waxhaw Survival Ware
Re: Arrow Spinner?
« Reply #2 on: August 17, 2015, 09:06:05 pm »
A photo would be great! Thanks
Logged
"As if you could kill time without injuring eternity" -Henry David Thoreau

Offline Bearded Mountain Man

  • Member
  • Posts: 70
    • Waxhaw Survival Ware
Re: Arrow Spinner/ Cresting Jig?
« Reply #3 on: August 17, 2015, 09:56:02 pm »
I just took the motor out of the mount and oiled it up a bit. It is stamped Bohning on it. So I would say it is a genuine Bohning Cresting Jig.
Logged
"As if you could kill time without injuring eternity" -Henry David Thoreau

Offline punch

  • Member
  • Posts: 100
Re: Arrow Spinner/ Cresting Jig?
« Reply #4 on: August 17, 2015, 11:49:08 pm »
Here's the photo
Logged

Offline Bearded Mountain Man

  • Member
  • Posts: 70
    • Waxhaw Survival Ware
Re: Arrow Spinner/ Cresting Jig?
« Reply #5 on: August 17, 2015, 11:52:56 pm »
I really appreciate that! thanks. I will make something up that looks similar.
Logged
"As if you could kill time without injuring eternity" -Henry David Thoreau

Offline chamookman

  • Member
  • Posts: 3,021
Re: Arrow Spinner/ Cresting Jig?
« Reply #6 on: August 18, 2015, 03:43:23 am »
The block (w/groove) is made of a fairly hard foam. Have fun ! Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Bearded Mountain Man

  • Member
  • Posts: 70
    • Waxhaw Survival Ware
Re: Arrow Spinner/ Cresting Jig?
« Reply #7 on: August 18, 2015, 07:41:46 am »
Thanks Bob now all I need is some paint and a brush.  :D
Logged
"As if you could kill time without injuring eternity" -Henry David Thoreau

Offline chamookman

  • Member
  • Posts: 3,021
Re: Arrow Spinner/ Cresting Jig?
« Reply #8 on: August 19, 2015, 04:17:03 am »
Craft store paint Pens and Sharpies can be used also - both work surprisingly well. Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline Bearded Mountain Man

  • Member
  • Posts: 70
    • Waxhaw Survival Ware
Re: Arrow Spinner/ Cresting Jig?
« Reply #9 on: August 19, 2015, 07:52:44 am »
Bob,
       I picked up some small brushes yesterday. I could not find the paint I wanted so I may resort to Sharpies. Thanks for the tip.
Logged
"As if you could kill time without injuring eternity" -Henry David Thoreau

Offline DavidV

  • Member
  • Posts: 472
Re: Arrow Spinner/ Cresting Jig?
« Reply #10 on: August 19, 2015, 09:04:37 am »
Walmart has some gloss enamels that work really good. You my have to experiment with the finish to find one compatible with it, I just used a spray lac so it didn't run.
Logged
Springfield, MO

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Arrow Spinner/ Cresting Jig?
« Reply #11 on: August 19, 2015, 12:20:23 pm »
Testors will work. It dries fast and poly wont make it run.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Arrow Spinner/ Cresting Jig?
« Reply #12 on: August 19, 2015, 02:49:39 pm »
X2 on the testors.   Works great and tons of colors.  Russ
Logged

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Arrow Spinner/ Cresting Jig?
« Reply #13 on: August 19, 2015, 03:31:30 pm »
How fast does it spin? Look like you could use it to dry eyes on fishing poles too!
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Bearded Mountain Man

  • Member
  • Posts: 70
    • Waxhaw Survival Ware
Re: Arrow Spinner/ Cresting Jig?
« Reply #14 on: August 19, 2015, 09:14:21 pm »
JoJo,
     It does not spin very fast. Not sure what you mean by "dry eyes"? I have been thinking about doing some more fishing. Please inform me as to what that term means. Thanks
Logged
"As if you could kill time without injuring eternity" -Henry David Thoreau
Pages: [1] 2
« previous next »