« previous next »
Pages: [1]

Author Topic: Need help on shaping bend through handle  (Read 1899 times)

0 Members and 1 Guest are viewing this topic.

Offline Ryan9273

  • Member
  • Posts: 16
Need help on shaping bend through handle
« on: August 16, 2015, 11:59:14 pm »
Red oak board 1.5 wide and .75 thick at handle 4 inch area. When should I start shaping the handle and I don't exactly know how I should shape it as to not ruin the bow, just round the front edges don't touch the back?
Logged

Offline Ryan9273

  • Member
  • Posts: 16
Re: Need help on shaping bend through handle
« Reply #1 on: August 17, 2015, 12:16:41 am »
or if I wanna wrap it in leather or such should I leather the handle as thick or tiller it down some to accommodate the wrap?
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Need help on shaping bend through handle
« Reply #2 on: August 17, 2015, 12:18:39 am »
Ww need pics, also you can do a search for bendys and check out the handles
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Ryan9273

  • Member
  • Posts: 16
Re: Need help on shaping bend through handle
« Reply #3 on: August 17, 2015, 12:25:54 am »
I'm having trouble uploading larger pics but
Logged

Offline bowandarrow473

  • Member
  • Posts: 696
Re: Need help on shaping bend through handle
« Reply #4 on: August 17, 2015, 10:49:41 am »
On bendy handle bows I always get the limbs bending first and then get the handle bending the amount I want. I did it the other way around a couple times and quickly realized I would end up with too much bend in the handle for my taste.
Logged
Whatever you are, be a good one.
Pages: [1]
« previous next »