« previous next »
Pages: [1]

Author Topic: Glued up and floor tillered.  (Read 3109 times)

0 Members and 1 Guest are viewing this topic.

loosenock

  • Guest
Glued up and floor tillered.
« on: February 09, 2008, 06:18:48 pm »
The grain run out that was concerning me last week was not a problem at all.  Yesterday I was able to cut the fishtailed splice by hand with a hacksaw and glued the billets together with Resorcinol.  This morning I made another barrel of spoke stave shavings and have a floor tiller.









Your comments and tips always welcome.

Thanks

Joe

Logged

Offline adb

  • Member
  • Posts: 5,339
Re: Glued up and floor tillered.
« Reply #1 on: February 09, 2008, 06:36:34 pm »
Looks very good!! You have a lot of wood to remove! Carry on.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Glued up and floor tillered.
« Reply #2 on: February 09, 2008, 06:43:55 pm »
Looks good to me. She is bending nicely at floor tiller. Looking forward to your outcome. ;)     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Dano

  • Member
  • Posts: 1,349
Re: Glued up and floor tillered.
« Reply #3 on: February 09, 2008, 06:49:11 pm »
Great lookin splice, I've seen some that were done with a band saw that don't look that good. Keep up the good work.
Logged
"If the women don't find you handsome, they should at least find you handy."


Nevada

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Glued up and floor tillered.
« Reply #4 on: February 09, 2008, 08:53:14 pm »
Nice work on that splice and the floor tiller looks good too. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline venisonburger

  • Member
  • Posts: 1,042
Re: Glued up and floor tillered.
« Reply #5 on: February 10, 2008, 01:29:26 am »
Correct me if I'm wrong, but I thought the splice would be done the other way, with the flats of the splice towards the back and belly.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Glued up and floor tillered.
« Reply #6 on: February 10, 2008, 01:32:02 am »
VB, The splice runs perpendicular to the plane of the bow.    Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Glued up and floor tillered.
« Reply #7 on: February 10, 2008, 02:04:36 am »
Looks good! Keep us updated on your progress..
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.
Pages: [1]
« previous next »