« previous next »
Pages: [1]

Author Topic: Death in the family.  (Read 1711 times)

0 Members and 1 Guest are viewing this topic.

Offline Billbob

  • Member
  • Posts: 36
Death in the family.
« on: August 12, 2015, 02:22:10 pm »
Was shooting a 58"ntn hickory pyramid, 2"@ the fades to 1/2" tips was pulling 50lbs @ 26" last Saturday when as I was drawing the bow, the top limb snapped off and ended up behind me.  Scared the crap out of me..lol.  The tiller looked good and I can't figure out why it broke, but I read something on here the other day about not heat treating the back of the bow.  I was trying to add reflex with a heat gun and toasted the belly and the back.  Would heating the back cause the back to fail?  This was going to be my bow for this fall, now I have to start over.  :(  If heating the back caused this, I don't want to do that again.

     
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: Death in the family.
« Reply #1 on: August 12, 2015, 02:28:54 pm »
Yes, heat treating the back could most certainly result in a tension failure.
Logged
Gordon

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Death in the family.
« Reply #2 on: August 12, 2015, 02:31:20 pm »
Dang, too bad you didn't read that very important tidbit before you toasted it.
Chalk it up to a learning experience and make a better one!
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Death in the family.
« Reply #3 on: August 12, 2015, 02:51:17 pm »
Next time try wiping the back down with veg oil before you temper the belly. It will still turn gold if you get too much heat on it, but it wont char and weaken nearly as much.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,613
Re: Death in the family.
« Reply #4 on: August 12, 2015, 04:17:56 pm »
Will you post pics of the break, back and belly? ...just in case there is another reason.  ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Death in the family.
« Reply #5 on: August 12, 2015, 04:23:11 pm »
It's short. 26x2+10=62"
t should be a minimum of 62".
Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Billbob

  • Member
  • Posts: 36
Re: Death in the family.
« Reply #6 on: August 12, 2015, 05:51:13 pm »
I should have taken a pic but I didn't. I had a camp fire going so I turned it into ashes  without thinking about recording the damage. Never saw hickory just snap like that.
Logged

Offline Spotted Dog

  • Member
  • Posts: 700
Re: Death in the family.
« Reply #7 on: August 12, 2015, 09:31:58 pm »
I always keep the longest limb for an atlatl.
Logged
A three strand cord is not easily broken. Ecc.4:12

Offline JW_Halverson

  • Member
  • Posts: 11,917
Re: Death in the family.
« Reply #8 on: August 12, 2015, 09:48:59 pm »
Sometimes things go from ho-hum to plenty exciting mighty fast, huh?   >:D

I have had more of them just fail in a sloppy splinter infested super-hinge, but I have had just a few gimme the BANG-DANG IT! sort of failure.  I am always left panting, heart pounding, knees knocking, and laughing because I am unscathed.  I am mighty glad to hear you were unhurt.  Well, then....Next piece of wood!
Logged
Guns have triggers. Bicycles have wheels. Trees and bows have wooden limbs.

mikekeswick

  • Guest
Re: Death in the family.
« Reply #9 on: August 13, 2015, 02:54:45 am »
It was very short for your draw length with a stiff handle. Think highly strained!
Was the hickory from a board? I'm forever reading how people think hickory is indestructible but it definitely isn't, grain violations will break hickory - i've seen it too many times now  :)
If it was a stave of hickory we are getting much closer to indestructible but not if the back gets too much heat. My reflexing/heat treating form is only 1 inch wide so there isn't anyway the heat can get reflected back onto the back.
Logged
Pages: [1]
« previous next »