« previous next »
Pages: [1]

Author Topic: Can I resteam an area  (Read 957 times)

0 Members and 1 Guest are viewing this topic.

Offline Ryan C

  • Member
  • Posts: 241
Can I resteam an area
« on: August 10, 2015, 11:00:28 am »
Hello everyone, so a yew bow I'm working on was not aligned at the tips and handle so I steam bent it at the handle and it looks like I bent it a little too far. Can I resteam the area and bend it back a little?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Can I resteam an area
« Reply #1 on: August 10, 2015, 11:01:28 am »
Sure can.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Del the cat

  • Member
  • Posts: 8,300
    • Derek Hutchison Native Wood Self Bows
Re: Can I resteam an area
« Reply #2 on: August 10, 2015, 11:35:35 am »
If it's over bent, you may just need to warm it a little and it may well creep back.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Ryan C

  • Member
  • Posts: 241
Re: Can I resteam an area
« Reply #3 on: August 10, 2015, 01:02:08 pm »
Ok thanks guys
Logged
Pages: [1]
« previous next »