« previous next »
Pages: [1]

Author Topic: Hickory, #49 @ 26  (Read 1190 times)

0 Members and 1 Guest are viewing this topic.

Offline bowandarrow473

  • Member
  • Posts: 696
Hickory, #49 @ 26
« on: August 08, 2015, 02:15:16 pm »
Hi everybody I just joined the other day and posted some arrows I just finished up for this bow. Any critiques or comments on the tiller, finish, etc... are welcome and much appreciated as I am only a novice bowyer at best :)


This bow is made of a hickory tree that I cut 8 months ago it is #49 @ 26in and shoots well even in the intense Florida humidity.
The top limb looks stiff in the outer 1/3rd but I think it may just be the contrast.
Logged
Whatever you are, be a good one.

Offline Hrothgar

  • Member
  • Posts: 1,477
Re: Hickory, #49 @ 26
« Reply #1 on: August 08, 2015, 02:41:23 pm »
The tiller looks pretty good in the full draw picture. Are the limbs the same length?
Logged
" To be, or not to be"...decisions, decisions, decisions.

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Hickory, #49 @ 26
« Reply #2 on: August 08, 2015, 03:13:30 pm »
The tiller looks pretty darn good to me, looks like your gripping the bow quite low though?
Logged

Offline bowandarrow473

  • Member
  • Posts: 696
Re: Hickory, #49 @ 26
« Reply #3 on: August 08, 2015, 05:23:02 pm »
Yes I am gripping it very low. When I was making the bow it just seemed like the limbs were more balanced at that point and it was also more comfortable to hold there, so I tried to tiller accordingly.

To answer Hrothgar's question, yes the limbs are the same length, I am just holding the bow very low so I think that causes the top limb to look longer
Logged
Whatever you are, be a good one.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: Hickory, #49 @ 26
« Reply #4 on: August 08, 2015, 07:10:27 pm »
Would help to see the tiller if you would draw an arrow..............
DBar
Logged
Integrity is doing the right thing when no one is looking
Pages: [1]
« previous next »