« previous next »
Pages: [1]

Author Topic: Rattle snake backing  (Read 1105 times)

0 Members and 1 Guest are viewing this topic.

Offline Wolfgang

  • Member
  • Posts: 15
Rattle snake backing
« on: August 04, 2015, 06:27:18 am »
Dear all,
I have a 61''/60lbs maple recurve maple bow with sinew backing. It's quite precious to me, and I wanna make it fine and protected from moisture. I also have 2 rattle snake skins, which is very costy over here. (We cannot just harvest snakes out of nature in Germany, cause we don't have them and it's forbidden anyway!) My question is, if it is useful to put them on the back of such a short, sinew backed bow? Will the snake skin stand the stress of a 29-30'' draw, and if put to the arms' sides as well, will the skin stand the compression.

Cheers, Wolfgang
Logged

blackhawk

  • Guest
Re: Rattle snake backing
« Reply #1 on: August 04, 2015, 06:31:22 am »
Itll be fine
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Rattle snake backing
« Reply #2 on: August 04, 2015, 08:50:46 am »
Yup it will work just fine
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Rattle snake backing
« Reply #3 on: August 04, 2015, 03:03:22 pm »
What kind of ratter is it? With timber rattler, if it is big enough you can split it down the middle and cover both limbs with one skin. Unlike diamond back, timber rattler patters can be split lengthwise and you still have a nice pattern.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »