« previous next »
Pages: [1]

Author Topic: Bamboo backing II  (Read 1342 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Bamboo backing II
« on: July 27, 2015, 02:53:43 pm »
I'm not going to do this but it crossed my mind enough to throw this out. Has anyone used thick CA to glue on a boo (or any) backing?  We use it to glue on tips so I don't think its strength is in question. Maybe brittle?  Not enough set-up time but maybe with the right method??
Just a question, don't take it too seriously ;) ;)
Logged

Offline Will H

  • Member
  • Posts: 2,120
Re: Bamboo backing II
« Reply #1 on: July 27, 2015, 03:32:08 pm »
Once you glue one up you'll understand why this not a good idea. Unless MAYBE if you glued it up straight with no reflex. But who wants to do that! :)
Logged
Proud Member of Twin Oaks Bowhunters
           Clarksville, Tennessee

   "Middle Tennessee is the place to be"

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Bamboo backing II
« Reply #2 on: July 27, 2015, 05:51:14 pm »
From what I have seen with crazyglue is that it gets brittle when it dries so I wouldn't trust it in a bending limb
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline bushboy

  • Member
  • Posts: 2,256
Re: Bamboo backing II
« Reply #3 on: July 27, 2015, 06:02:07 pm »
Pva glue gives more of a open glue time.i'd just get my hands all stuck to the bow!lol!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Bamboo backing II
« Reply #4 on: July 27, 2015, 06:03:50 pm »
You need a glue that allows you time to strap/clamp it up etc.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline DC

  • Member
  • Posts: 10,396
Re: Bamboo backing II
« Reply #5 on: July 27, 2015, 07:23:10 pm »
Quote from: Del the cat on July 27, 2015, 06:03:50 pm
You need a glue that allows you time to strap/clamp it up etc.
Del


Quote from: Will H on July 27, 2015, 03:32:08 pm
Once you glue one up you'll understand why this not a good idea. Unless MAYBE if you glued it up straight with no reflex. But who wants to do that! :)


OK I've done one(with epoxy) and I understand. If I'd used CA there wouldn't be enough acetone in the Western Hemisphere to separate me from that bow!!!
Logged
Pages: [1]
« previous next »