« previous next »
Pages: [1]

Author Topic: bark removale  (Read 1657 times)

0 Members and 1 Guest are viewing this topic.

Offline helmet

  • Member
  • Posts: 168
bark removale
« on: July 25, 2015, 06:45:32 pm »
I have a yew stave that was cut and split about a year ago. I am getting ready to remove the bark, what is the best way/tool to do this?Thanks for the help.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: bark removale
« Reply #1 on: July 25, 2015, 06:50:47 pm »
Check out del the cat's blog i think he lets it pop off while tillering
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline DC

  • Member
  • Posts: 10,396
Re: bark removale
« Reply #2 on: July 25, 2015, 06:56:10 pm »
I've found(in the few that I've done) that most of it pops off during floor tillering. It's kind of a clue that you've got it bending. Don't let the noise startle you ;D ;D
Logged

Offline Weylin

  • Member
  • Posts: 2,296
Re: bark removale
« Reply #3 on: July 25, 2015, 08:30:58 pm »
I've been letting the bark pop off as well. be careful though. Some times the bark takes more bending to come off and then when it finally comes off it can surprise you with how much draw weight you lose, possibly leaving you with a lighter weight bow than you wanted.
Logged

Offline helmet

  • Member
  • Posts: 168
Re: bark removale
« Reply #4 on: July 25, 2015, 08:33:13 pm »
Thats sweet! Thanks guys. I'll give it a shot.
Logged

Offline Ryan C

  • Member
  • Posts: 241
Re: bark removale
« Reply #5 on: July 25, 2015, 11:25:34 pm »
I just use a drawknife and cabinet scraper.
Logged

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: bark removale
« Reply #6 on: July 27, 2015, 10:21:27 am »
I use a draw knife and scraper too since more times than not, I thin the sapwood.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer
Pages: [1]
« previous next »