« previous next »
Pages: [1]

Author Topic: 10% moisture and a hickory bow?  (Read 1072 times)

0 Members and 1 Guest are viewing this topic.

Offline beartail

  • Member
  • Posts: 162
10% moisture and a hickory bow?
« on: July 22, 2015, 10:33:57 am »
in my past experience working with hickory I always seal the bow at 7% or 8%  and have had good results. this bow is a Cherokee type and is at 10% moisture and I have no way of reducing it.ive always been lucky and had a car or attic and even once I built a drying box but now I have nothing to do that with.so do you think 10% will be too high? the bow has 2 1/2" back set and is 40#@28"and is 63"ntn. I thought about piking it down a inch or so to pick up the weight but gonna leave it alone for now.it shoots and draws so sweet!
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: 10% moisture and a hickory bow?
« Reply #1 on: July 22, 2015, 10:48:21 am »
You can seal it at 8% and it can be up to 12% a week later, sealer only slows moisture in and out, it doesn't prevent it 100%. So it really doesn't matter. If the bow is done, seal it.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: 10% moisture and a hickory bow?
« Reply #2 on: July 22, 2015, 12:25:25 pm »
10% is good but I prefer 6-8% for hickory. That way they get a good start. Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!
Pages: [1]
« previous next »