« previous next »
Pages: [1]

Author Topic: steaming question  (Read 1061 times)

0 Members and 1 Guest are viewing this topic.

Offline Aries

  • Member
  • Posts: 493
steaming question
« on: July 13, 2015, 10:30:02 am »
After steaming and recurving or reflexing a piece how long do you leave it in your jig?  How about osage specifically. 
Thanks for your help guys.
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: steaming question
« Reply #1 on: July 13, 2015, 10:37:22 am »
I leave heat treated or manipulated wood on the form over night. I want to be sure it is completely cooled, inside or out. I'd hate to pull out what I just put in by stressing it too soon.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Aries

  • Member
  • Posts: 493
Re: steaming question
« Reply #2 on: July 13, 2015, 10:44:33 am »
I failed recently.
I steamed about 4 inches of reflex into some osage and after it was cool to the touch( about 40 minutes or so) I took it out and ended up with only 2 inches of reflex. :-\
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: steaming question
« Reply #3 on: July 13, 2015, 10:55:58 am »
It's often prudent to leave it overnight... it's too tempting to fiddle with stuff too early... glue ups or heat bending.
Mind, nearly all bending needs an allowance for spring back.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Aries

  • Member
  • Posts: 493
Re: steaming question
« Reply #4 on: July 13, 2015, 12:59:15 pm »
Thank you guys for the information I appreciate it
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline Joec123able

  • Member
  • Posts: 1,769
Re: steaming question
« Reply #5 on: July 13, 2015, 01:19:14 pm »
Like has been said, overnight is fine.
Logged
I like osage
Pages: [1]
« previous next »