« previous next »
Pages: [1]

Author Topic: Recurve question  (Read 1182 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Recurve question
« on: July 05, 2015, 03:59:16 pm »
I'm working on a recurve and I've left the tips wide to allow for last minute adjustments. When is the "last minute"? I've got it braced at 6" and I'm pulling it to 16", going for 27.5".
Logged

Offline Gordon

  • Member
  • Posts: 3,299
Re: Recurve question
« Reply #1 on: July 05, 2015, 04:16:52 pm »
As soon as you are happy with the string and tip alignment you are good to go.
Logged
Gordon

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Recurve question
« Reply #2 on: July 05, 2015, 04:52:45 pm »
Once you reach first low brace you should be able to tell how it all lines up.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline DC

  • Member
  • Posts: 10,396
Re: Recurve question
« Reply #3 on: July 05, 2015, 05:14:49 pm »
I thought I might have to wait until the whole string lifted off so I could tell where it wanted to lay down.
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Recurve question
« Reply #4 on: July 06, 2015, 03:38:21 am »
If your at full brace you can start narrowing your tips. its when i usually do it, but not all at once.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Recurve question
« Reply #5 on: July 06, 2015, 06:05:25 pm »
At first low brace the limbs should be under tension and that will tell you how things line up.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »