« previous next »
Pages: 1 [2] 3

Author Topic: elm bow  (Read 7111 times)

0 Members and 1 Guest are viewing this topic.

Offline loefflerchuck

  • Member
  • Posts: 1,126
    • www.heartwoodbows.com
Re: elm bow
« Reply #15 on: June 26, 2015, 05:00:45 pm »
Looks like you might want to enter that in a flight shooting contest
Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: elm bow
« Reply #16 on: June 26, 2015, 05:31:25 pm »
Thx's guys!i kinda wanted to try a deep narrow handle @ 1" and flaring out to just under. 1-1/2"to just over midlimb,then back down to a deeper limb to skinny levers.i. Didn't measure reflex before tilling,but it started with quite a bit of dried in reflex.i reduced to very close to final dimension at floor tiller so after heat treating it only took a couple of scrapes to balance..fight shooting is not all that popular up here in canada,at least manitoba.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline bushboy

  • Member
  • Posts: 2,256
Re: elm bow
« Reply #17 on: June 26, 2015, 05:33:09 pm »
Flight shooting!lol!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline joachimM

  • Member
  • Posts: 675
  • Good - better - broken
Re: elm bow
« Reply #18 on: June 26, 2015, 05:34:48 pm »
That's a superb bow   8)
Logged

Offline Badly Bent

  • Member
  • Posts: 3,750
Re: elm bow
« Reply #19 on: June 26, 2015, 06:16:47 pm »
Very cool bow, nice design and execution on that one.
Logged
I ain't broke but I'm badly bent.

Offline Arrowind

  • Member
  • Posts: 1,428
Re: elm bow
« Reply #20 on: June 26, 2015, 06:20:45 pm »
Awesome bow!  Very well done.
Logged
Talking trees. What do trees have to talk about, hmm... except the consistency of squirrel droppings?

Offline ajooter

  • Member
  • Posts: 1,234
Re: elm bow
« Reply #21 on: June 26, 2015, 11:53:24 pm »
That's a great bow!! We don't have a lot of elm down here due to dutch elm disease.  I really like the stain job.  Could you detail just how you got that effect?
Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: elm bow
« Reply #22 on: June 27, 2015, 12:21:57 am »
Yes,really quite simple.i used Kelly green rit dye,about 4 parts dye,1 part isopropyl alcohol.i applied the mix with a small craft brush,allowed to dry for about 10 minutes and then scrubbed down with a wet rag.i gave it a bit of drying time and repeated with black rit dye at the same ratio,following the same steps.then I wet it down with armor all,allowed to dry and applied wipe on poly.allowed to dry,then reapplied armor all for 4 coats.lightly sanding with 320 grit sand paper,and touching up with 0000 steel wool for highlights.hope that makes sense,kinda ends up looking like frog skin.i've done it with hickory and it turns out great!maple not so much!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline simson

  • Member
  • Posts: 2,310
  • stonehill-primitive-bows
    • stonehill-primitive-bows
Re: elm bow
« Reply #23 on: June 27, 2015, 01:35:17 am »
Just beautiful execution! I like these profiles: front side braced and drawn. Very well made!
You should try elm and fuming some time - just to see the difference in the patterns of the grain. But your dye job is awesome too.
Logged
Simon
Bavaria, Germany

Offline ajooter

  • Member
  • Posts: 1,234
Re: elm bow
« Reply #24 on: June 27, 2015, 08:54:45 am »
Thanks bushy....got some hickory to try that on  >:D
Logged

Offline Aries

  • Member
  • Posts: 493
Re: elm bow
« Reply #25 on: June 27, 2015, 09:42:10 am »
The profile on that bow is awesome!
Logged
"If the only tool you have is a hammer,
                   you tend to see every problem as a nail."
                               ~Abraham Maslow

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: elm bow
« Reply #26 on: June 27, 2015, 09:50:09 am »
Very nice bow.  Sometimes you cut some Elm that is just outstanding

I sort of figured there was some heat-treating involved there
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline bushboy

  • Member
  • Posts: 2,256
Re: elm bow
« Reply #27 on: June 27, 2015, 10:52:49 am »
Thanks guys,appreciated! After seeing the results of heat treating I wouldn't dream of not!thanks for passing it on Marc!Rob.
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Glerian

  • Member
  • Posts: 22
Re: elm bow
« Reply #28 on: June 27, 2015, 12:54:07 pm »
Great looking bow!
Logged
"I took the one less traveled by, and that has made all the difference." - Robert Frost

Offline PeteC

  • Member
  • Posts: 2,005
Re: elm bow
« Reply #29 on: June 27, 2015, 05:09:46 pm »
That's a fine bow.Great job . God Bless
Logged
What you believe determines how you behave., Pete Clayton, Whitehouse ,Texas
Pages: 1 [2] 3
« previous next »