« previous next »
Pages: [1] 2

Author Topic: I Broke One Today  (Read 4888 times)

0 Members and 1 Guest are viewing this topic.

Offline Drewster

  • Member
  • Posts: 687
I Broke One Today
« on: June 25, 2015, 04:16:41 pm »
I was shooting in my first Mollegabet and it broke just before I got to full draw this afternoon.  It is also my first bow made of black locust, so it's a bummer for sure.  If any of you experiences guys can help determine what might have caused this, I would appreciate it.  Don't want to make this mistake again if possible.

I had shot it about 30 times starting at half draw and gradually increasing my draw length.  When it broke I was probably at about 26" or 27".  I had not gotten to full draw......my 29 1/2" or so.  Maybe about 27" a few times on the tiller board.  I had gotten this bow braced and drawing to 25" @ 45# more quickly than I usually do so had not exercised the limbs as many times as I normally do.  The back was smooth from my scraper but I had not done the final sanding yet.  I'm wondering if either of these two factors contributed to the break or just my bad luck on this one?

Thanks for any help or feedback you might have.







Logged
Drew - Boone, NC

Offline alwayslookin

  • Member
  • Posts: 350
Re: I Broke One Today
« Reply #1 on: June 25, 2015, 04:22:40 pm »
That stinks man. Everyone breaks some though. Did you chase a ring on it? How thick was the ring? I've never used black locust before. It broke clean looks like maybe a weak spot there. Do you have a picture of drawn?
Logged
In all your ways acknowledge  him and he will make your paths straight.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: I Broke One Today
« Reply #2 on: June 25, 2015, 04:25:27 pm »
That's a clean tension shear Id say, don't know why. Kind of opposite of what locust will typically do. It will compress and fret first because its generally mean in tension.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Spotted Dog

  • Member
  • Posts: 700
Re: I Broke One Today
« Reply #3 on: June 25, 2015, 04:27:51 pm »
 Man that sucks. I guess that's why I like white wood , cause no ring to chase. I blew up an
Osage not long ago. It was my first Osage. Limb broke like yours.
Logged
A three strand cord is not easily broken. Ecc.4:12

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: I Broke One Today
« Reply #4 on: June 25, 2015, 04:58:58 pm »
Quote from: PEARL DRUMS on June 25, 2015, 04:25:27 pm
That's a clean tension shear Id say, don't know why. Kind of opposite of what locust will typically do. It will compress and fret first because its generally mean in tension.

+1. The only tension failure I've had with locust was due to a cut pin knot/ring violation.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline half eye

  • Member
  • Posts: 3,300
Re: I Broke One Today
« Reply #5 on: June 25, 2015, 04:59:39 pm »
Mr. Drewster,
       Sent ya an email bud.....you was about 5-10 scrapes (outer half of @ working limb) from a killer bow.....just a bit too much force at the grip fade. Get ahold of me ....maybe I can get you a chunk of ironwood.
rich
Logged

Offline bow101

  • Member
  • Posts: 2,235
Re: I Broke One Today
« Reply #6 on: June 25, 2015, 05:03:56 pm »
Transition into the fade is the same thickness.  This has happened a few times to me, it became overly stressed in that area.   Thats my 2 bits worth.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline Drewster

  • Member
  • Posts: 687
Re: I Broke One Today
« Reply #7 on: June 25, 2015, 05:23:32 pm »
Alwayslookin, yes I had removed the sapwood and chased a ring for the back.  It looked good. 

Half eye, thanks, I'll be in touch.

I'll be better tuned in to tillering the next one.  Live and learn.   Thanks everyone for the feedback......most helpful.
Logged
Drew - Boone, NC

Offline TolkienFan

  • Member
  • Posts: 70
Re: I Broke One Today
« Reply #8 on: June 25, 2015, 06:18:14 pm »
Sorry man, I broke one last week in the exact same spot. It hurts.
Logged
“The Road goes ever on and on
Down from the door where it began.
Now far ahead the Road has gone,
And I must follow, if I can.”

Offline Badger

  • Member
  • Posts: 8,124
Re: I Broke One Today
« Reply #9 on: June 25, 2015, 06:49:51 pm »
 Did the bow show any signs of chrysaling before it broke. You might be able to still see them.
Logged

Offline bushboy

  • Member
  • Posts: 2,256
Re: I Broke One Today
« Reply #10 on: June 25, 2015, 07:15:00 pm »
Clean tension break,fungus maybe?I think folks follow the bibles by getting them to bend to much in the inners to a fault.that's my take anyways.it goes against Tim bakers mantra,witch I believe to be the grail in wooden bows!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Drewster

  • Member
  • Posts: 687
Re: I Broke One Today
« Reply #11 on: June 25, 2015, 07:37:46 pm »
Badger, no signs of chrysals at all.
Logged
Drew - Boone, NC

Offline Ryan C

  • Member
  • Posts: 241
Re: I Broke One Today
« Reply #12 on: June 25, 2015, 07:53:37 pm »
Just use Osage haha. That shouldn't have broke if your back was clean and it was long enough.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,637
Re: I Broke One Today
« Reply #13 on: June 25, 2015, 07:53:57 pm »
Locust is very strong in tension. It could be fungus although locust is pretty fungal resistant but there is one around that causes the rings to delaminate. I've seen lots of whitewood break like that but not woods like locust, osage or mulberry.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Drewster

  • Member
  • Posts: 687
Re: I Broke One Today
« Reply #14 on: June 25, 2015, 09:48:30 pm »
Pat B, can you see the fungus in locust?  Since this is the first locust I have tried to make a bow with, I'm not familiar with what fungus infested locust looks like.  The break was a huge surprise for sure.  The tiller was not perfect.  I was still fine tuning a bit but I certainly didn't think it was off enough to cause this type explosion.

Sure appreciate everyone's help.
Logged
Drew - Boone, NC
Pages: [1] 2
« previous next »