Author Topic: Slabs  (Read 4675 times)

0 Members and 1 Guest are viewing this topic.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Slabs
« on: June 23, 2015, 08:32:35 am »
I've seen several mentions of slabs being cut and used and it made me wonder how many people use them.  Personally, even though I have some sitting around, I avoid them as much as possible.
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Slabs
« Reply #1 on: June 23, 2015, 09:04:27 am »
They have helped me understand how to pressure flake better. But the cave man in me thinks its cheating. The group near me Knap's a lot of slabs, but they are in the game to make money. And they do!
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Re: Slabs
« Reply #2 on: June 23, 2015, 09:45:25 am »
 When working slabs I much prefer to percussion a slab, so I need slabs that are 3/8 min. to do that, I hate starting with a square edged slab and pressure flaking it. If I am doing that I will fog it.

When I percussion I will bevel one edge all the same direction to set a platform  and the skin on side at a time, When that is clear I will go to the other side.

Offline JEB

  • Member
  • Posts: 1,735
Re: Slabs
« Reply #3 on: June 23, 2015, 07:46:58 pm »
Like I tell my son when he laughs at me using a copper tips pressure flaker.  If the Indians  had them they would have used them.

My goal is to make hunting points and an occasional knife and slabs help me with that process.

Offline TRACY

  • Member
  • Posts: 4,523
Re: Slabs
« Reply #4 on: June 23, 2015, 08:19:38 pm »
I've got some of various material and enjoy working them when I just want to use the Ishi stick. Nothing wrong with slabs IMO . Knap in your comfort zone and have fun :D

Tracy
It is what it is - make the most of it!    PN500956

Offline Chippintuff

  • Member
  • Posts: 777
Re: Slabs
« Reply #5 on: June 23, 2015, 08:32:31 pm »
At first I hated to work slabs because it was so much harder to do than percussion. Eventually I started using slabs and mostly pressure flake them. Now slabs make up the majority of my knapping. I have wrangled with those square edges till I have developed an approach that works well for me. Cost of the rock was my main reason for starting doing slabs. I eventually bought an old rock saw, and it works very well.

WA

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,911
  • Eddie Parker
Re: Slabs
« Reply #6 on: June 23, 2015, 10:35:28 pm »
I cut and use them.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline RickB

  • Member
  • Posts: 301
Re: Slabs
« Reply #7 on: June 24, 2015, 10:25:45 am »
I'll work a few months on slabs until I tire of them and then switch back to spalls of various types of rocks. Rick B

Offline Wolf Watcher

  • Member
  • Posts: 1,308
Re: Slabs
« Reply #8 on: June 24, 2015, 05:21:02 pm »
When a fellow gets older and the hand strength is not there then an ishi stick and slabs still lets me make blades and hunting points.  Also when you get some rare jasper you don't want it in a pile at your feet.  Joe
Get Close---Shoot Straight

Offline Zuma

  • Member
  • Posts: 4,324
Re: Slabs
« Reply #9 on: June 24, 2015, 05:53:17 pm »
  Also when you get some rare jasper you don't want it in a pile at your feet.  Joe

LOL I'm to cheap to buy diamonds. And that's only one foot.
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: Slabs
« Reply #10 on: June 24, 2015, 09:07:58 pm »
I've seen several mentions of slabs being cut and used and it made me wonder how many people use them.  Personally, even though I have some sitting around, I avoid them as much as possible.

Why? You don't mind modern glues?
Debating is an intellectual exchange of differing views...with no winners.

Offline bubby

  • Member
  • Posts: 11,054
Re: Slabs
« Reply #11 on: June 24, 2015, 11:02:59 pm »
If you think about it using slabs is less wasteful, economical and makes hard to get rock sustainable, it's a win win
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: Slabs
« Reply #12 on: June 25, 2015, 01:58:48 am »
The smaller the slab, the better I like it.  Material is not saved when I get my hands on a large one:  I often end up with two smaller slabs... and then I feel better.   :)
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Zuma

  • Member
  • Posts: 4,324
Re: Slabs
« Reply #13 on: June 25, 2015, 12:00:44 pm »
The best  I have worked were from my
6' by 5/8 th inch glass patio table top that blew over
and shattered into huge slabs.
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Slabs
« Reply #14 on: June 25, 2015, 01:16:09 pm »
I've seen several mentions of slabs being cut and used and it made me wonder how many people use them.  Personally, even though I have some sitting around, I avoid them as much as possible.

Why? You don't mind modern glues?

Not quite the same thing.  You need glue to hold 2 pieces of wood together, not so with stone  :) .
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com