« previous next »
Pages: [1]

Author Topic: Can I flip this?  (Read 2361 times)

0 Members and 1 Guest are viewing this topic.

Offline J05H

  • Member
  • Posts: 478
Can I flip this?
« on: June 03, 2015, 10:12:31 pm »
I'm not sure what will happen when I try to flip the tips on this one. Where the knot hole is on the belly, there is only a slight hump and a red spot on the back. I'm not talking about a full recurve, just slightly flipped, but the bend will be right where the knot is. Any suggestions or insights?

Logged
If you never have time to do it right, you'll always have time to do it over.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Can I flip this?
« Reply #1 on: June 03, 2015, 10:18:11 pm »
Knots near the end like that make me nervous about flipping them.  I usually put it on my reflex caul and leave the tips alone.
Logged
I started out with nothin' and I still got most of it left

Offline bubby

  • Member
  • Posts: 11,054
Re: Can I flip this?
« Reply #2 on: June 03, 2015, 10:26:27 pm »
Go ahead and flip it, if you have 8" past the knot you can do a static
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Vgo750

  • Member
  • Posts: 79
Re: Can I flip this?
« Reply #3 on: June 03, 2015, 11:22:30 pm »
Anxious to see replies on this as i am literally pondering the exact same thing on a stave with a slightly bigger knot in about the exact same place as yours.  I think Im going to reflex at the handle and inch or two and heat treat but not flip the tips.
Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Can I flip this?
« Reply #4 on: June 04, 2015, 12:06:27 am »
One thing I have learned is that slight hump will cause problems. It forces the wood to bend right where it shouldn't. Maybe cut a matching dip in the caul.
Logged

Offline sleek

  • Member
  • Posts: 6,764
Re: Can I flip this?
« Reply #5 on: June 04, 2015, 12:24:27 am »
I use wedges under it to spread out the bend properly.  Done it several times without problems.  Just put wedges under infront and behind pushing them in further where you need it to bend more. Have the tip and mid limb clamped down to do this.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline J05H

  • Member
  • Posts: 478
Re: Can I flip this?
« Reply #6 on: June 04, 2015, 02:03:33 am »
So, the consensus seems to be that it's not a great idea, but there are ways to make it work. The important thing is to focus on just the tip, and leave the knot unbending. Have I got that right? I think I have a plan worked out, but I'm gonna think about for a few days before I do anything.Thanks for the advice guys, and if anyone has anything to add, I'm all ears.
Logged
If you never have time to do it right, you'll always have time to do it over.

mikekeswick

  • Guest
Re: Can I flip this?
« Reply #7 on: June 04, 2015, 04:41:16 am »
What you've got to ask yourself is how violated the grain is there - that determines how far you can push it. The sharpest recurves need one perfect ring on the belly, you obviously haven't got that....but it's quite hard to say how long the piece of string is!
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Can I flip this?
« Reply #8 on: June 04, 2015, 09:00:57 am »
Mike he just wants to flip the tips he's fine for that
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline J05H

  • Member
  • Posts: 478
Re: Can I flip this?
« Reply #9 on: June 04, 2015, 06:05:45 pm »
Ok, here's where I'm at. I have about 1.5" of reflex and enough length that my string angle won't be too bad. It would probably be fine if I left it as is, but I think I'm gonna go ahead and try for very slight flipped tips. Here's what it looks like now. Thanks for the help guys.

Edit: Now that I'm seeing this as a static pic, it looks like I need more reflex in the left limb to make them match. Any thoughts?

Logged
If you never have time to do it right, you'll always have time to do it over.
Pages: [1]
« previous next »