Author Topic: wintu/gunther  (Read 3032 times)

0 Members and 1 Guest are viewing this topic.

Offline bubby

  • Member
  • Posts: 11,054
wintu/gunther
« on: May 27, 2015, 01:31:14 am »
been a while since I made one of these need to nock a few more out to get the rust off
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: wintu/gunther
« Reply #1 on: May 27, 2015, 02:00:28 am »
Nice Bubby, where's the material from?
Debating is an intellectual exchange of differing views...with no winners.

Offline bubby

  • Member
  • Posts: 11,054
Re: wintu/gunther
« Reply #2 on: May 27, 2015, 02:30:27 am »
Thats a pc of goldstone
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Trapper Rob

  • Member
  • Posts: 3,719
Re: wintu/gunther
« Reply #3 on: May 27, 2015, 12:38:29 pm »
Nice Bubby every time I try tips like that they snap.

Stringman

  • Guest
Re: wintu/gunther
« Reply #4 on: May 27, 2015, 01:33:40 pm »
Very clean work, Bub!

Offline vinemaplebows

  • Member
  • Posts: 1,419
Re: wintu/gunther
« Reply #5 on: May 27, 2015, 01:34:08 pm »
Thats a pc of goldstone

Fooled me thought it was obsidian...pumpkin. :)
Debating is an intellectual exchange of differing views...with no winners.

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: wintu/gunther
« Reply #6 on: May 27, 2015, 05:37:16 pm »
Very nice Bub! Make a whole set of em and arrange them in a semmetrical display. One for the wall :)
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Majuba Tom

  • Member
  • Posts: 275
Re: wintu/gunther
« Reply #7 on: May 27, 2015, 11:30:13 pm »
That would make a nice display. :)

Offline YosemiteBen

  • Member
  • Posts: 1,952
Re: wintu/gunther
« Reply #8 on: May 28, 2015, 12:02:34 pm »
nice one Bub!

Offline TRACY

  • Member
  • Posts: 4,523
Re: wintu/gunther
« Reply #9 on: June 03, 2015, 08:08:27 am »
Nice points bubby!


Tracy
It is what it is - make the most of it!    PN500956

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: wintu/gunther
« Reply #10 on: June 05, 2015, 11:35:21 pm »
I like that style...NICE job as always bub ;)
Is this bow making a sickness? or the cure...

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,628
  • Sorry Officer, I was just gathering "materials".
Re: wintu/gunther
« Reply #11 on: June 05, 2015, 11:39:18 pm »
 8) Nice.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline Chippintuff

  • Member
  • Posts: 777
Re: wintu/gunther
« Reply #12 on: June 06, 2015, 06:56:26 pm »
That is nice work. I agree that a geometric design of those would look really fine.

WA

Offline bubby

  • Member
  • Posts: 11,054
Re: wintu/gunther
« Reply #13 on: June 06, 2015, 08:48:10 pm »
Y'all talked me into it once i get it done I'll post pics
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Re: wintu/gunther
« Reply #14 on: June 08, 2015, 08:41:25 am »
I used to make a lot of Gunther types, hard to keep the wings on. Nice job.