« previous next »
Pages: 1 [2]

Author Topic: Flipping tips?  (Read 9554 times)

0 Members and 1 Guest are viewing this topic.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Flipping tips?
« Reply #15 on: May 16, 2015, 06:33:32 pm »
   GREEN WOOD, STEAM

  DRY WOOD DRY, HEAT

  Don't add mosture to any white wood ,any wood for that matter. IF YOU ADD TO MUCH
( MOISTURE)  WHEN YOU REMOVE OR LET IT DRY NATUTRALLY. You flip will lose,moisture ,lose bend in the flip.

  ALWAYS DRY HEAT ON SEASONED WOOD.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline DavidV

  • Member
  • Posts: 472
Re: Flipping tips?
« Reply #16 on: May 16, 2015, 07:22:43 pm »
This was done with dry heat but I dont go much sharper before I switch to steam. the wood is hackberry and it was oiled well prior to heating.

Logged
Springfield, MO

Offline Ryan C

  • Member
  • Posts: 241
Re: Flipping tips?
« Reply #17 on: May 16, 2015, 07:56:57 pm »


   Steam for 30 minutes is the way to go for me.
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Flipping tips?
« Reply #18 on: May 16, 2015, 10:09:41 pm »
Quote from: crooketarrow on May 16, 2015, 06:33:32 pm
   GREEN WOOD, STEAM

  DRY WOOD DRY, HEAT

  Don't add mosture to any white wood ,any wood for that matter. IF YOU ADD TO MUCH
( MOISTURE)  WHEN YOU REMOVE OR LET IT DRY NATUTRALLY. You flip will lose,moisture ,lose bend in the flip.

  ALWAYS DRY HEAT ON SEASONED WOOD.
The dogma is strong in this post.
Logged

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Flipping tips?
« Reply #19 on: May 16, 2015, 10:24:38 pm »
Yeah, I don't use dry heat on wet wood but beyond that I decide based completely on the severity of the bend.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline clewis

  • Member
  • Posts: 119
Re: Flipping tips?
« Reply #20 on: May 17, 2015, 12:32:37 pm »
Thanks for all the input, going try it out tonight. Should the thickness of bend or curve be at final dimensions?

Clewis
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Flipping tips?
« Reply #21 on: May 17, 2015, 12:58:01 pm »
I don't buy into the only dry heat on seasoned wood bit, most whitewoods are always steam bent and all tight statics
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Flipping tips?
« Reply #22 on: May 17, 2015, 04:14:16 pm »
Quote from: huisme on May 16, 2015, 10:24:38 pm
Yeah, I don't use dry heat on wet wood but beyond that I decide based completely on the severity of the bend.
I'm in Marc's boat
Logged

Offline clewis

  • Member
  • Posts: 119
Re: Flipping tips?
« Reply #23 on: May 18, 2015, 12:02:11 am »
Well i got some good results, 40min steam session and its looking good. How long should I leave it clamped in place? I put a few inches in not as much as  ryan's but it looks good. Ill post pictures up tomorrow.
Thanks for all the input and boost of confidence everybody.

Clewis
Logged

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Flipping tips?
« Reply #24 on: May 18, 2015, 03:04:36 am »
Quote from: clewis on May 18, 2015, 12:02:11 am
Well i got some good results, 40min steam session and its looking good. How long should I leave it clamped in place? I put a few inches in not as much as  ryan's but it looks good. Ill post pictures up tomorrow.
Thanks for all the input and boost of confidence everybody.

Clewis

I leave them in about an hour past cool. I've had my flips stay better if I heat temper the belly afterward.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,118
  • if you have to ask you wouldn't understand ,Tenn.
Re: Flipping tips?
« Reply #25 on: May 18, 2015, 08:15:59 am »
I do like huisme ,just depends but most time dry heat if the bend is not to severe. I try to keep it in the same growth ring on the belly also if possible ,that really helps to keep from lifting a splinter. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline clewis

  • Member
  • Posts: 119
Re: Flipping tips? (pics)
« Reply #26 on: May 19, 2015, 10:57:41 am »
So I thought I`d make good and post my results of my steam session the other day. I still have to do the other limb but I think I wont have any problems doing so. I like how the steam works, no problems at all. I left the tips extra long thinking I would need it for leverage but don't think it was necessary and I will be cutting a few inches from the tip. I plan on an overall length of 58in reflexed tips and set back handle with some sinew.

I thought I'd post my latest haul as well, mostly HHB with some white ash. Most hhb staves range from 56-70inches.

Clewis 
Logged
Pages: 1 [2]
« previous next »