Author Topic: Mill Creek Clovis  (Read 3099 times)

0 Members and 1 Guest are viewing this topic.

Offline bowmo

  • Member
  • Posts: 1,035
Mill Creek Clovis
« on: April 30, 2015, 06:40:16 pm »
Real ummm...'rustic' looking. Haha.  ::) Would be a Cumberland if I wasn't such a wuss. That crystal seam was pain in the rear. Free hand antler fluted.



« Last Edit: April 30, 2015, 06:43:27 pm by bowmo »

Offline TRACY

  • Member
  • Posts: 4,523
Re: Mill Creek Clovis
« Reply #1 on: April 30, 2015, 06:48:02 pm »
That is really nice!

Tracy
It is what it is - make the most of it!    PN500956

Offline Majuba Tom

  • Member
  • Posts: 275
Re: Mill Creek Clovis
« Reply #2 on: April 30, 2015, 06:53:59 pm »
Very nice. I would be very happy with that. Now I just need to stop breaking them. :o

Offline Zuma

  • Member
  • Posts: 4,324
Re: Mill Creek Clovis
« Reply #3 on: April 30, 2015, 07:52:11 pm »
Very cool 8)
Is Mill Creek the style or material?
Zuma
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline nclonghunter

  • Member
  • Posts: 1,779
Re: Mill Creek Clovis
« Reply #4 on: April 30, 2015, 08:19:38 pm »
Nice work...hand fluting is difficult. I have looked at a lot of fluted points recently and noticed the originals often ran a little sideways most likely from striking a little off center or angled, further indicating they were hand fluted rather than put in a jig of some kind..just my opinion.

You got long straight flutes...well done!
There are no bad knappers, only bad flakes

Offline bowmo

  • Member
  • Posts: 1,035
Re: Mill Creek Clovis
« Reply #5 on: May 01, 2015, 12:04:15 am »
Thanks guys. It was the perfect candidate for one since it a was an old thick clunky leaf shaped preform. Really do wish I could go back in time and hit it twice as quick now.

Zuma, the material is Mill Creek chert.

nc, ya for sure. I did this one with a flat rock with folded leather over it on my left leg, pressed it hard against it with my left hand and swung with my right. I really need to dress this billet, also I wish I had something with me to tie the stone to my leg, since I want it more on the side of my leg than I could really get it. I had many annoying attempts to get that 'right feel' on the second flute cuz the stone wanted to slip. But, I really don't see how jigs and such would have been needed by them. I don't consider myself very good or practiced at fluting and I knocked these off easy.

Offline StevenT

  • Member
  • Posts: 612
Re: Mill Creek Clovis
« Reply #6 on: May 01, 2015, 11:00:19 am »
That is one nice "authentic" looking point. And the flake looks like it stayed in one piece. Love the look.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Mill Creek Clovis
« Reply #7 on: May 01, 2015, 05:31:11 pm »
Great point I love the shot of the flute flake.  Nice work

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Mill Creek Clovis
« Reply #8 on: May 07, 2015, 02:04:43 pm »
Nice flutes! That does look original.
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,621
  • Sorry Officer, I was just gathering "materials".
Re: Mill Creek Clovis
« Reply #9 on: May 07, 2015, 02:13:45 pm »
Nice.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline bowmo

  • Member
  • Posts: 1,035
Re: Mill Creek Clovis
« Reply #10 on: May 08, 2015, 11:26:46 am »
Haha. Thanks guys!

Stringman

  • Guest
Re: Mill Creek Clovis
« Reply #11 on: May 08, 2015, 11:35:39 am »
Nice work! Despite your humility, hand fluting is not as simple as you lead on. This is a great demonstration of your knapping instincts taking over. Only comes with tonnage.  8)

Offline bowmo

  • Member
  • Posts: 1,035
Re: Mill Creek Clovis
« Reply #12 on: May 08, 2015, 11:55:20 am »
Haha...tonnage is something I've never had! Illinois is not a great state for picking up free stone, haha. My rock stash usually fits into two 5 gal buckets sadly lol. I really appreciate the kind words.

Offline iowabow

  • member
  • Member
  • Posts: 4,722
Re: Mill Creek Clovis
« Reply #13 on: May 09, 2015, 07:06:28 am »
Very nice ABO work.
(:::.) The ABO path is a new frontier to the past!