« previous next »
Pages: [1]

Author Topic: Have you ever...  (Read 1949 times)

0 Members and 1 Guest are viewing this topic.

Offline beartail

  • Member
  • Posts: 162
Have you ever...
« on: May 08, 2015, 05:29:55 pm »
have you ever looked through your spalls and found that perty one you want to work on and when your done its an ok point that your not satisfied with then find a piece of crap and start working on it and it comes out a nice little point! I did that today and just thought id put it out there.
Logged

Offline bowmo

  • Member
  • Posts: 1,035
Re: Have you ever...
« Reply #1 on: May 08, 2015, 08:16:03 pm »
Oooh yea. Probably because the ones that look good are wide flat spalls and sometimes I snap em while percussing the bulb off, and the clunksters have plenty of mass on em to let me wallop em. There's great satisfaction in pulling a nice looking point from a small ugly rock tho.
Logged

Offline Knapper

  • Member
  • Posts: 1,057
  • David Atnip
Re: Have you ever...
« Reply #2 on: May 08, 2015, 08:26:26 pm »
Picked up two pieces of junk today and took the 30 min challenge and made two points I was pleased with giving away
Knapper
Logged
Ad Dare Servire
PM104250

Offline cowboy

  • Member
  • Posts: 7,035
  • Paul Wolfe. Springtown, TX
Re: Have you ever...
« Reply #3 on: May 08, 2015, 08:35:46 pm »
I can relate. Yessir!
Logged
When you come upon a track or trail you do not know, follow it to the point of knowing.

Offline Zuma

  • Member
  • Posts: 4,324
Re: Have you ever...
« Reply #4 on: May 08, 2015, 09:57:11 pm »
LOL
Been doing it all week.
Zuma
Logged
If you are a good detective the past is at your feet. The future belongs to Faith.

Offline soy

  • Member
  • Posts: 2,897
  • pm106221
Re: Have you ever...
« Reply #5 on: May 09, 2015, 01:44:02 am »
Yep👍
Logged
Is this bow making a sickness? or the cure...
Pages: [1]
« previous next »