« previous next »
Pages: [1]

Author Topic: all bamboo bow project. Western style  (Read 1708 times)

0 Members and 1 Guest are viewing this topic.

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
all bamboo bow project. Western style
« on: April 25, 2015, 01:09:57 am »
I want to try and make another western bow with bamboo belly, and back.  I think my usual riser pattern may be too extreme in curve.   I notice the riser blanks at 3 rivers are 17".   Is that normal?  Mine start as 10 but shrink as I build the bow.

Also. I'm wondering if bamboo will steam bend backwards to get the curve up the riser?
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: all bamboo bow project. Western style
« Reply #1 on: April 25, 2015, 09:21:34 am »
Do you have a pic of what you are talking about?
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Prarie Bowyer

  • Member
  • Posts: 1,599
Re: all bamboo bow project. Western style
« Reply #2 on: April 26, 2015, 12:11:14 am »
Imagine a Fred bear Montana but bamboo lamination bad bamboo where there is fiberglass
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: all bamboo bow project. Western style
« Reply #3 on: April 26, 2015, 12:24:41 am »
Saluki used to make this style. You can make the curve up to the riser with a dry heat using a heat gun.
Logged

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: all bamboo bow project. Western style
« Reply #4 on: April 26, 2015, 09:19:02 am »
James parker makes bamboo back and belly bows. Also poorfolkbows has a build along if I remember correctly
Logged
Nothing ventured nothing gained
Pages: [1]
« previous next »