I'm not sure if you can see but there are two cracks close to the edge running with the grain. One is just under a 1/4" in and the other about 3/32". I'm already down to about 1/2" thick, so I'm pretty sure they won't disappear with tillering, especially since they're just up from the fade. If they were in the middle, I'd either super glue them or just ignore them, but being on the edge, the have me worried. If I narrow the bow till they're gone, I'll be left with about an inch of width. I'd rather not do that for reasons of stability, but I will if I have to. I'd appreciate any advice any of you can give. Thanks in advance.