« previous next »
Pages: [1]

Author Topic: sealing / finishing horn  (Read 2964 times)

0 Members and 1 Guest are viewing this topic.

Offline Jodocus

  • Member
  • Posts: 897
sealing / finishing horn
« on: April 17, 2015, 05:17:51 am »
Do you oil or wax polished horn parts? or just leave it as is?
Logged
Don't shoot!

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: sealing / finishing horn
« Reply #1 on: April 17, 2015, 05:34:19 am »
I use tung oil or tru oil, whatever I'm using on the bow
Logged

Offline Dances with squirrels

  • Member
  • Posts: 1,222
Re: sealing / finishing horn
« Reply #2 on: April 17, 2015, 06:33:08 am »
Same as the rest of the bow, Thunderbird bow finish.
Logged
Straight wood may make a better bow, but crooked wood makes a better bowyer

Offline DaveMac

  • Member
  • Posts: 33
Re: sealing / finishing horn
« Reply #3 on: April 17, 2015, 07:10:38 am »
The bow I'm working on has buffalo horn nocks on so I've been researching this myself, I can't find the exact thread but I read somewhere that you need to seal with shellac before applying a oil based finish like tung oil.

Unlike the other guys I'm not writing from experience, so wouldn't just take my word on it, I would quite like some clarification on this matter also.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: sealing / finishing horn
« Reply #4 on: April 17, 2015, 08:07:09 am »
DaveMac, I think you are thinking about antler. Antler has a pithy center. If you don't seal that part first it will soak up the glue starving the glue joint.
 Jodocus, if there are scratches in the horn you might want to sand them out. Other than that use whatever finish on your bow for the horn nocks.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: sealing / finishing horn
« Reply #5 on: April 17, 2015, 08:35:45 am »
Buff it up on a buffing wheel ,wipe over with beeswax polish
Del
Logged
Health warning, these posts may contain traces of nut.

Offline bubby

  • Member
  • Posts: 11,054
Re: sealing / finishing horn
« Reply #6 on: April 17, 2015, 09:01:22 am »
I'm with del buff and wax
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: sealing / finishing horn
« Reply #7 on: April 17, 2015, 09:20:16 am »
Tung/Tru oil will flake off buff horn. Id suggest a coat of shellac first, Then whatever finish you chose over that.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline Jodocus

  • Member
  • Posts: 897
Re: sealing / finishing horn
« Reply #8 on: April 18, 2015, 05:44:07 am »
thanks guys!
Logged
Don't shoot!
Pages: [1]
« previous next »