« previous next »
Pages: 1 [2]

Author Topic: Best Bow Design For Target Shooting- New question...  (Read 5748 times)

0 Members and 1 Guest are viewing this topic.

mikekeswick

  • Guest
Re: Best Bow Design For Target Shooting- New question...
« Reply #15 on: April 19, 2015, 02:35:35 am »
A pyramid MAY be less stable than a parallel width design. If you are only going for a mild r/d then you could do a pyramid front taper. I normally keep the first 12 inches parallel then taper into the tips.
Logged

Offline arachnid

  • Member
  • Posts: 517
Re: Best Bow Design For Target Shooting- New question...
« Reply #16 on: April 19, 2015, 05:20:41 am »
That's what I thought, since I'm going to put deflex in the inner limb, I figured it needs more material so it won't fail...

12" is about half of the limb... is it enough or should I make 2/3 of the limb parallel
Logged
Pages: 1 [2]
« previous next »