« previous next »
Pages: 1 [2]

Author Topic: Urac ?  (Read 3984 times)

0 Members and 1 Guest are viewing this topic.

Offline Sidmand

  • Member
  • Posts: 302
Re: Urac ?
« Reply #15 on: April 15, 2015, 04:08:31 pm »
Quote from: Pat B on April 15, 2015, 04:01:22 pm
It should work well with boo/ipe. It is a gap filing glue. I toothed both surfaces and glued it up. I think fresh wood is a better 
"de-greaser" than acetone or other solvents so sand both glue surfaces, tooth them, blow off the dust and glue it up. I've used a toothing plane and hacksaw blades on the glue surfaces, both with good results.

Got it, thank you!!  I've seen that glue in the big box stores and always wondered if it would work well, guess I need to try it now.
Logged
"Criticism is something we can avoid easily by saying nothing, doing nothing, and being nothing." --> Aristotle

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Urac ?
« Reply #16 on: April 15, 2015, 04:26:30 pm »
I agree with Pat - - it is gap filling to a point, and I dont degrease.  Rough up the surface with hacksaw blade - brush away dust and glue.  Ipe - boo is usually what I use it for.  Also ipe to ipe (handles). 
Logged
Pages: 1 [2]
« previous next »