Author Topic: Little help with Osage tiller...  (Read 4706 times)

0 Members and 1 Guest are viewing this topic.

Offline Mark Smeltzer

  • Member
  • Posts: 324
Re: Little help with Osage tiller...
« Reply #15 on: April 03, 2015, 07:05:10 pm »
the more I look at the pictures, the more I think I wouldn't touch it at all.

Offline Cloudfeather

  • Member
  • Posts: 431
Re: Little help with Osage tiller...
« Reply #16 on: April 03, 2015, 08:10:53 pm »
Front profile. Was dead even, no reflex. Has taken just a hair or set. Still think the top limb is a tiny bit stiff.

Offline Mark Smeltzer

  • Member
  • Posts: 324
Re: Little help with Osage tiller...
« Reply #17 on: April 03, 2015, 09:19:03 pm »
If you think the top limb is stiff, measure it. String the bow and go about 7" out from the center of the handle and measure the distance from the string to the belly on both limbs. I normally try to have a 1/8 shorter measurement on the bottom limb, meaning the bottom limb is stiffer. Others do it differently but for me that shoots best.

Mark

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: Little help with Osage tiller...
« Reply #18 on: April 03, 2015, 11:33:14 pm »
I think you're right sled.  Try what Rich stated back on the first page.  He gives great advise.   :)