« previous next »
Pages: [1] 2

Author Topic: My first working recurve.....  (Read 6358 times)

0 Members and 2 Guests are viewing this topic.

Offline mikaluger (Mick Kay)

  • Member
  • Posts: 91
My first working recurve.....
« on: March 30, 2015, 08:01:20 am »
Hi guys,
I hope everyone is well, sorry I have not posted a bow in while, I have had a lot on.........
Here is a project I have been working on, a good friend of mine purchased this Pacific yew ELB from a bowyer in Canada. He was not happy with it. ( see Pics) and asked me if I could make some thing of it.

I was supposed to be a longbow with 45lb of draw at 28" and was lucky it pulled 35lb........it had a silly amount of set and one limb had a wicked twist.
But is Yew and it is a full length stave.
Not to be wasted.

From this..........
Logged

Offline mikaluger (Mick Kay)

  • Member
  • Posts: 91
Re: My first working recurve.....
« Reply #1 on: March 30, 2015, 08:06:56 am »
To this......
cut the rubbish nocks off, flattened the back made up a hickory core and power lam and backed the whole lot with pole bamboo.
Nice little recurve, quite thin but with thickish limbs....nice and quick!
66" NtN 48lb @ 28".
Logged

Offline mikaluger (Mick Kay)

  • Member
  • Posts: 91
Re: My first working recurve.....
« Reply #2 on: March 30, 2015, 08:08:28 am »
Last couple...
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,546
Re: My first working recurve.....
« Reply #3 on: March 30, 2015, 08:40:31 am »
Nice recovery.   I'm amazed that some folks will misrepresent themselves just to make a buck. Good for you for totally eliminating the original maker in your makeover. Well done...and welcome back!   
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline PatM

  • Member
  • Posts: 6,737
Re: My first working recurve.....
« Reply #4 on: March 30, 2015, 09:10:53 am »
Did the workmanship of one of our Canadian members just get bashed? lol
 Looks good now.
Logged

Offline half eye

  • Member
  • Posts: 3,300
Re: My first working recurve.....
« Reply #5 on: March 30, 2015, 09:39:07 am »
Well there you have it.....it's for sure a fine bow NOW....very nice work, sir!!!!
rich
Logged

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: My first working recurve.....
« Reply #6 on: March 30, 2015, 10:56:36 am »
Wow, great job. Nice save.   In the original pic, that seems like an awful lot of set for a 35# yew elb. Looks like it was only bending in the handle.
Logged

Offline Drewster

  • Member
  • Posts: 687
Re: My first working recurve.....
« Reply #7 on: March 30, 2015, 11:39:30 am »
Vast improvement......nice salvage job for sure.  Congrats on a fine bow.
Logged
Drew - Boone, NC

Offline paco664

  • Member
  • Posts: 307
  • ok,ok.. i might have done it...
Re: My first working recurve.....
« Reply #8 on: March 30, 2015, 12:30:05 pm »
Wow. .. that is a great improvement. .. very clever/cool transformation
Logged
I'm too drunk to taste this chicken"~Col.H.Sanders

blackhawk

  • Guest
Re: My first working recurve.....
« Reply #9 on: March 30, 2015, 12:35:53 pm »
Thats quite the make over...no one wood ever know if ya didn't mention what it was before.
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: My first working recurve.....
« Reply #10 on: March 30, 2015, 12:59:19 pm »
Nice turn around
Logged

Offline Del the cat

  • Member
  • Posts: 8,300
    • Derek Hutchison Native Wood Self Bows
Re: My first working recurve.....
« Reply #11 on: March 30, 2015, 01:06:04 pm »
Woo, Yup, your version is much better.
I hope you kept those nocks, you could enter them in the "Ugly Nock" contest >:D
Nice save.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline bushboy

  • Member
  • Posts: 2,256
Re: My first working recurve.....
« Reply #12 on: March 30, 2015, 06:18:52 pm »
Looks very nice!beauty save eh!just 4 the. Record it wasn't me!lol!
Logged
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: My first working recurve.....
« Reply #13 on: March 30, 2015, 06:30:03 pm »
Nice stave on that bow, looks much better than the original. And ya I'm with bushboy, wasn't me either! Haha
Logged

Offline mikaluger (Mick Kay)

  • Member
  • Posts: 91
Re: My first working recurve.....
« Reply #14 on: March 30, 2015, 07:37:12 pm »
Thanks Fella's,

I could not believe that bow stave when I saw it......How you could take someones money and send THAT is beyond me. Ridiculous. To much Hassle to send it all the way back to Canada from Australia, let alone argue the toss. To much distance.
Expensive piece of yew, that one!!!!
He is a happy camper now tho.............lol

Cheers,
Mick.
Logged
Pages: [1] 2
« previous next »