« previous next »
Pages: [1]

Author Topic: A little elbow grease payed off.  (Read 3100 times)

0 Members and 1 Guest are viewing this topic.

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
A little elbow grease payed off.
« on: April 11, 2015, 12:22:29 am »
Some of you might remember a bandsaw and a belt/disc sander I bought last summer. Well I've been using them as is. And I finally special ordered me some belts to fit my sander. They arrived today and they fit and work great. While putting the belt on I noticed some grease on my hands. So I went and got my bottle of degreaser and started scrubbing down the whole machine. I was surprised how dirty and grimey it was. I also took some Murphys oil soap and cleaned up the wood top then whipped it down with some pledge wood oil that my wife uses. I am really proud of the way it cleaned up. Here is a before and after shot. Patrick


Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: A little elbow grease payed off.
« Reply #1 on: April 11, 2015, 12:28:05 am »
Nice sander!
Logged
I started out with nothin' and I still got most of it left

Offline Chief RID

  • Member
  • Posts: 684
Re: A little elbow grease payed off.
« Reply #2 on: April 11, 2015, 02:40:44 pm »
Excellent looking machine!
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: A little elbow grease payed off.
« Reply #3 on: April 11, 2015, 02:45:30 pm »
Very nice. Amazing what a little elbow grease and effort will produce. You're set now.  8)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Knoll

  • Member
  • Posts: 3,016
  • Mikey
Re: A little elbow grease payed off.
« Reply #4 on: April 11, 2015, 03:33:18 pm »
Nice!
Logged
... alone in distant woods or fields, in unpretending sproutlands or pastures tracked by rabbits, even in a bleak and, to most, cheerless day .... .  I suppose that this value, in my case, is equivalent to what others get by churchgoing & prayer.  Hank Thoreau, 1857

Offline JonW

  • Member
  • Posts: 1,906
Re: A little elbow grease payed off.
« Reply #5 on: April 11, 2015, 05:47:11 pm »
That there is a bow makin' machine!!
Logged

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,909
  • Eddie Parker
Re: A little elbow grease payed off.
« Reply #6 on: April 11, 2015, 06:14:21 pm »
Nice, another hundred years out of it. ;)
Logged
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline sleek

  • Member
  • Posts: 6,743
Re: A little elbow grease payed off.
« Reply #7 on: April 11, 2015, 08:01:03 pm »
Looks like old navy ship machine shop equipment.  Im in love with it.
Logged
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: A little elbow grease payed off.
« Reply #8 on: April 13, 2015, 03:34:00 am »
Yeah, they don't make 'em like like that any more.
If I had a bigger shop I'd love a solid one like that.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: A little elbow grease payed off.
« Reply #9 on: April 13, 2015, 03:42:58 am »
Looks like a great tool. You are gonna like that. 
Logged
Howard
Gautier, Mississippi

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: A little elbow grease payed off.
« Reply #10 on: April 13, 2015, 04:12:10 am »
Thanks fellas! I've put it to use some with just the disc on the side. But now with the belt working and it cleaned up all shinny. I can't wait to get sanding dust all over it!

Next one will be my 14in delta Rockwell bandsaw. It's a good bit dirtier than the sander. Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Aaron H

  • Member
  • Posts: 3,437
Re: A little elbow grease payed off.
« Reply #11 on: April 13, 2015, 09:52:02 am »
Cleaned up real nice.  Whenever i have a choice, I will always go with old, well made tools like this rather than something brand new.  Nice job leb
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: A little elbow grease payed off.
« Reply #12 on: April 13, 2015, 10:08:54 am »
With a simple jig you can taper your arrows now. 11deg for the nock end and 5deg for the point end. You can also make tapered arrows, either rear tapers, barrel tapers or full tapers.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline lebhuntfish

  • Member
  • Posts: 3,823
  • If the wood will bend, I'll make it beautiful!
Re: A little elbow grease payed off.
« Reply #13 on: April 13, 2015, 11:51:23 am »
Thanks guy's!
I new about  the jig for tapering the arrow tips. But I would like to learn more about tapering the shafts, Pat.
Patrick
Logged
Once an Eagle Scout, always an Eagle Scout!

Missouri, where all the best wood is! Well maybe not the straightest!

Building a bow has been the most rewarding, peaceful, and frustrating things I have ever made with my own two hands!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: A little elbow grease payed off.
« Reply #14 on: April 13, 2015, 02:32:24 pm »
I've used a jig just for tapering the rear 9" to 10". I think it was Eric Krewson that was tapering the rear and full length using a table top belt sander.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »