« previous next »
Pages: [1]

Author Topic: Bow holder for tiller tree  (Read 3686 times)

0 Members and 1 Guest are viewing this topic.

Offline Badger

  • Member
  • Posts: 8,124
Bow holder for tiller tree
« on: March 24, 2015, 03:17:34 pm »
  I have never really been satisfied with the attachments I use to hold my bow in the tiller tree. I always have to monkey with it a bit to get it ballanced just right. Not enough of a problem to have ever bothered to fix it but enough that I want to make a better one. My favorite is actually a leather strap I use sometimes on difficult shapes.

   Any suggestions?
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Bow holder for tiller tree
« Reply #1 on: March 24, 2015, 03:34:49 pm »
Did you see the one willh posted, that was nice
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Badger

  • Member
  • Posts: 8,124
Re: Bow holder for tiller tree
« Reply #2 on: March 24, 2015, 03:37:56 pm »
  I didn't see it, whats the name of the thread
Logged

Offline TimBo

  • Member
  • Posts: 1,047
Re: Bow holder for tiller tree
« Reply #3 on: March 24, 2015, 03:40:08 pm »
I saved a photo of that one - it's a cool idea. 
Logged

Offline TimBo

  • Member
  • Posts: 1,047
Re: Bow holder for tiller tree
« Reply #4 on: March 24, 2015, 03:41:58 pm »
Sorry - I was trying to attach the photo, and it didn't work the way I thought.  The thread with this pic was "R/D Osage w/copperheads".
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: Bow holder for tiller tree
« Reply #5 on: March 24, 2015, 03:45:55 pm »
   I do use a leather strap on some of mine but because of stretch it can't be used for precise weighing. Maybe I will just go get a no stretch strap of some kind.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Bow holder for tiller tree
« Reply #6 on: March 24, 2015, 04:16:39 pm »
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Badger

  • Member
  • Posts: 8,124
Re: Bow holder for tiller tree
« Reply #7 on: March 24, 2015, 04:43:39 pm »
  I like that strap, I wonder if I can buy it allreay made up.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Bow holder for tiller tree
« Reply #8 on: March 24, 2015, 05:35:52 pm »
It's just the hook end of a ratchet tie strap like we used tying loads on trucks
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bow101

  • Member
  • Posts: 2,235
Re: Bow holder for tiller tree
« Reply #9 on: March 24, 2015, 11:33:01 pm »
I don't have a photo  yet, but what I did with the last tiller job is tape on a small piece of wood (cull) so the riser would not Rock & Roll.     :laugh: Ya ok I did it backwards because I wanted a semi shaped riser so I could grip the bow normally for drawing.  My stick is about 2 1/4" wide.    I only use it to a point then go for the bathroom mirror tiller.  :D
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

mikekeswick

  • Guest
Re: Bow holder for tiller tree
« Reply #10 on: March 25, 2015, 03:24:15 am »
I like that idea because it can pivot/flex. Yes it's just the end off a ratchet strap, I even have one lying around. :)
Logged

Offline Del the cat

  • Member
  • Posts: 8,322
    • Derek Hutchison Native Wood Self Bows
Re: Bow holder for tiller tree
« Reply #11 on: March 25, 2015, 04:30:43 am »
Mine is a curved block like a D lying back on its flat face. I've glued thin rubber on the curved face.
It allows some rock n roll and some support for odd shaped grips.
Del
Logged
Health warning, these posts may contain traces of nut.

Offline Badger

  • Member
  • Posts: 8,124
Re: Bow holder for tiller tree
« Reply #12 on: March 25, 2015, 07:10:48 am »
  Del, sounds like what I am using now. Mike, I think I know where I can get an old ratchet strap. I just retired from the trucking industry.
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Bow holder for tiller tree
« Reply #13 on: March 25, 2015, 10:54:16 am »
After seeing Will's setup, I made one just like it.  It works great!
Logged
Pages: [1]
« previous next »