« previous next »
Pages: [1] 2

Author Topic: Is there a point in recurving tips on a 70 " bow?  (Read 9760 times)

0 Members and 1 Guest are viewing this topic.

Offline dratera

  • Member
  • Posts: 60
Is there a point in recurving tips on a 70 " bow?
« on: March 22, 2015, 09:20:20 pm »
Hey guys and girls, Im at floor tiller on this wych elm flatbow, its 70" tip to tip, is that a too long bow for flipping tips?
never done it before. Just want it because it looks nifty :P It has already got quite reflexed while drying. 

Planning for about 80#, how thin must tips be before heat (gun) bending ? Should i tiller it mostly done first or just bend them straigh away?

Lots of questions. Pretty wide at the fades, 2" 1/4 (5,8 cm) and 1" 1/4 ( 2,8 cm) deep

Last pic just for fun, was going to scrap my old car, couldnt resist shooting it first





Logged

Offline DC

  • Member
  • Posts: 10,396
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #1 on: March 22, 2015, 09:32:54 pm »
"Just want it because it looks nifty"

Good enough reason right there ;)
Logged

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #2 on: March 23, 2015, 12:37:54 am »
The biggest reason to "flip" the tips is to open up the string angle at full draw, or to put more strain on the wood to raise the poundage. Can't see either of those reasons in your case.

But as DC said, if you just want to do it...
Logged
Jim Davis

Kentucky--formerly Maine

Offline arachnid

  • Member
  • Posts: 517
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #3 on: March 23, 2015, 03:32:09 am »
I've been wondering the same. Will it make a big difference in a 66" bow? Does recurved tips REALLY effect only short bows (String angle)?
Say I have a straight bow that pulls 40#. If I reflex the tips, I raise the early draw weight making energy storage more effective. But, does the few more fps worth the extra work?
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #4 on: March 23, 2015, 08:14:55 am »
Try it.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline PatM

  • Member
  • Posts: 6,737
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #5 on: March 23, 2015, 08:17:38 am »
 One thing is certain, it won't hurt things unless you really screw up  the tiller. I would say recurving closes string angle, not opens.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #6 on: March 23, 2015, 09:05:22 am »
I think there is a 70-72" bow in tbb2 from india that's a recurve and they had good reports on performance, not sure which vol it's the one on composite bows
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline PatM

  • Member
  • Posts: 6,737
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #7 on: March 23, 2015, 09:37:27 am »
   Bows of the World actually.
  It does look like this stave is verging toward being whip tillered just by looking at the side profile. Get the working section of the limbs moving before you do any recurving.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #8 on: March 23, 2015, 10:16:04 am »
Yup thanks Pat😉
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline bow101

  • Member
  • Posts: 2,235
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #9 on: March 23, 2015, 03:35:16 pm »
 >:D    what have ya dun to that poor car.    ;D
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline dratera

  • Member
  • Posts: 60
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #10 on: March 23, 2015, 07:33:13 pm »
Boys will be boys :)  was considering driving around like that just too see the looks on peoples faces..

Think youre right pat, bit too thick in the inner limbs.

Thanks for the input everyone! think i will give recurves a try, after som practice on a scrap bow
« Last Edit: March 23, 2015, 07:37:56 pm by dratera »
Logged

Offline Jim Davis

  • Member
  • Posts: 1,352
  • Reparrows
    • Reparrows
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #11 on: March 23, 2015, 09:36:21 pm »
Quote from: PatM on March 23, 2015, 08:17:38 am
One thing is certain, it won't hurt things unless you really screw up  the tiller. I would say recurving closes string angle, not opens.
Probably just not much difference.
Logged
Jim Davis

Kentucky--formerly Maine

Offline PatM

  • Member
  • Posts: 6,737
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #12 on: March 23, 2015, 10:33:31 pm »
 That's quite a lot of difference and it's even greater if the recurve is more accurately depicted.
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #13 on: March 23, 2015, 10:40:51 pm »
Google japp south indian bow for a great looking long recurve
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline medicinewheel

  • Member
  • Posts: 3,629
Re: Is there a point in recurving tips on a 70 " bow?
« Reply #14 on: March 24, 2015, 04:43:52 am »
Quote from: bubby on March 23, 2015, 10:40:51 pm
Google japp south indian bow for a great looking long recurve

Jaap (not japp) Koppedrayer
Logged
Frank from Germany...
Pages: [1] 2
« previous next »