Author Topic: Osage bow I'm working on (Read 1222 times)

Blaflair2 · « **on:** March 18, 2015, 05:51:08 pm »

So my question is the dip or twist in the limb. Do I gotta take it out if the tip comes back around? It's where the stave snakes in the picture.

Eric Krewson · « **Reply #1 on:** March 19, 2015, 10:34:46 am »

The one in the first picture will be hard to take out, the one in the second picture will come out pretty easily. I would attempt to straighten both, some osage responds to heat well, some does not, maybe you will get lucky.

PEARL DRUMS · « **Reply #2 on:** March 19, 2015, 10:48:28 am »

Work it down to a floor tiller of say 60-65#, and both will come out. Might need steam on the bigger, but I doubt it. That's my .02 cents.

Blaflair2 · « **Reply #3 on:** March 19, 2015, 11:10:55 am »

I got it cut out last night. And the dip doesn't look too bad. It crazy howich different it can look once it's taken down a bit. I'm gonna mess with it a little cuz I wanna reflex the limbs. But most of it will probly stay