« previous next »
Pages: [1]

Author Topic: Longbow Handle lengths?  (Read 3768 times)

0 Members and 1 Guest are viewing this topic.

Offline tomthumb

  • Member
  • Posts: 19
Longbow Handle lengths?
« on: March 18, 2015, 12:41:32 pm »
Hello Folks,

1" up, 4" down.. These are the standard handle dimensions for a longbow, right?!..

Shooting 1" above the centre seems to make sense to me with a symmetrical bow, as I can see then you are pulling the bow back through the centre into the top of your hand, as opposed to over the top.

4" down; Is this for people with people with big hands?!.. My hand is just under 4" across; A 5" handle seems unnecessary then. This has been particularly evident when working shorter staves and having limited working limb length and trying to achieve standard draw lengths.

So, a handle 1" up, 3" down would presumably be better suited for myself, right? OR... Is there some specific reasons it is 1" up 4"down?

I'm sorry if this seems like a stupid question, but I thought it was worth asking the question before marking up a limb taper.

Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Longbow Handle lengths?
« Reply #1 on: March 18, 2015, 12:56:30 pm »
My arrow passes are 2" above center on every bow.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Longbow Handle lengths?
« Reply #2 on: March 18, 2015, 01:07:19 pm »
  I also uselly make mine 2"s for a selfbow. If the person has big hands, where I make my handle 1/2 inch longer. I'll make my self 1/4" higher.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Longbow Handle lengths?
« Reply #3 on: March 18, 2015, 01:28:17 pm »
The way I learned was 1 3/4" up and 2 1/4" down from the center line.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Bryce

  • Global Moderator
  • Member
  • Posts: 3,125
  • Pacific Ghost Longbows
Re: Longbow Handle lengths?
« Reply #4 on: March 18, 2015, 02:07:58 pm »
From center. 1" up
From center. 3" down

4" handle
Logged
Clatskanie, Oregon

Offline bubby

  • Member
  • Posts: 11,054
Re: Longbow Handle lengths?
« Reply #5 on: March 18, 2015, 02:59:33 pm »
I just find the center of the bow and go two inches each way for a four inch grip, on occasion i will go 1-1/4" up and from that mark measure 4" down but not often
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: Longbow Handle lengths?
« Reply #6 on: March 18, 2015, 03:19:39 pm »
Quote from: Bryce (Pinecone) on March 18, 2015, 02:07:58 pm
From center. 1" up
From center. 3" down

4" handle

+1, and I usually do 1.5" fades for stiff handles, 3-4" fades if they're necessary in bendys.
Logged
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.
Pages: [1]
« previous next »