« previous next »
Pages: [1]

Author Topic: Fletching Size  (Read 3881 times)

0 Members and 2 Guests are viewing this topic.

Offline bow101

  • Member
  • Posts: 2,235
Fletching Size
« on: March 16, 2015, 03:58:44 pm »
Do you have any preference when it comes to feather length.?  I'm using 4"............ does longer fletching have any significance besides causing more drag.
Logged
"The privilege of a lifetime is being who you are."  Joseph Campbell

Offline RBLusthaus

  • Member
  • Posts: 753
Re: Fletching Size
« Reply #1 on: March 16, 2015, 04:02:05 pm »
looks nice  . . . .
Logged

Offline jeffp51

  • Member
  • Posts: 1,641
Re: Fletching Size
« Reply #2 on: March 16, 2015, 07:23:38 pm »
I use 4 inch because I can sometimes get two fletches from one feather that way, and I am cheap.---er-----frugal---er---thrifty--something.  Probably just cheap.
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Fletching Size
« Reply #3 on: March 16, 2015, 08:06:59 pm »
Ideally you want to use the least amount of fletching and still get good arrow flight. If you are mostly target shooting small fletching should be fine. If you hunt, larger fletching is usually used to help stabilize an arrow with a broadhead.
I use 5 1/2" fletching that I burn myself but they are similar to high backed shields. At 15 to 20 yards(hunting) it really doesn't matter as long as you get good arrow flight.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline crooketarrow

  • Member
  • Posts: 2,790
Re: Fletching Size
« Reply #4 on: March 16, 2015, 08:27:26 pm »
  I've always shot 5 1/2.
Logged
DEAD IS DEAD NO MATTER HOW FAST YOUR ARROW GETS THERE
20 YEARS OF DOING 20 YEARS OF LEARNING 20 YEARS OF TEACHING

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: Fletching Size
« Reply #5 on: March 17, 2015, 12:22:28 am »
Quote from: jeffp51 on March 16, 2015, 07:23:38 pm
I use 4 inch because I can sometimes get two fletches from one feather that way, and I am cheap.---er-----frugal---er---thrifty--something.  Probably just cheap.
+1
I make mine a touch higher To compensate  for the shorter length.
Logged

Offline chamookman

  • Member
  • Posts: 3,027
Re: Fletching Size
« Reply #6 on: March 17, 2015, 04:39:29 am »
I use a chopper to get 5 1/2" High back shield cuts - they fly like darts for Me ! Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Fletching Size
« Reply #7 on: March 17, 2015, 07:39:27 am »
I use 4", 5" & 5.5". I cant really tell a difference if the bow and arrows are in harmony. Thinking about whipping up 2 or 3 arrows with 2.5" fletching to see what they do in the wind with broad heads. If you get Trad Bowhunter Mag, Dennis Kamstra did a small write up on it in his usual tips article. Pretty cool.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline JEB

  • Member
  • Posts: 1,735
Re: Fletching Size
« Reply #8 on: March 17, 2015, 07:45:58 am »
I use either 5" or 4". I like shield cut for looks. I will also  take 5" parabolic and cut 3/4" off the back to give it as better look.

My son uses 2" plastic feathers out of his 70# compound and his arrows fly like darts.  Back in the late 50's and early 60's my dad shot 6 fletch arrows using 2" feathers while target shooting.
Logged
Pages: [1]
« previous next »