« previous next »
Pages: [1] 2

Author Topic: Backing?  (Read 4789 times)

0 Members and 2 Guests are viewing this topic.

Offline E. Jensen

  • Member
  • Posts: 481
Backing?
« on: March 10, 2015, 08:55:32 pm »
For a heartwood only yew bow, should I back it and with what?  Not sinew because I want to keep it long ~72".
Logged

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: Backing?
« Reply #1 on: March 10, 2015, 09:39:24 pm »
Rawhide
Logged

Offline bubby

  • Member
  • Posts: 11,054
Re: Backing?
« Reply #2 on: March 10, 2015, 09:46:45 pm »
Boo
Logged
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline Peacebow_Coos

  • Member
  • Posts: 811
Re: Backing?
« Reply #3 on: March 10, 2015, 09:55:52 pm »
Logged

Offline E. Jensen

  • Member
  • Posts: 481
Re: Backing?
« Reply #4 on: March 10, 2015, 09:59:08 pm »
Does an 'air' backing on yew heartood handle grain violation pretty well?
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Backing?
« Reply #5 on: March 10, 2015, 10:05:06 pm »
I have no yew experience so this is a question for the guys who do.  Could you just put down a single layer of sinew?
Logged
I started out with nothin' and I still got most of it left

Offline E. Jensen

  • Member
  • Posts: 481
Re: Backing?
« Reply #6 on: March 10, 2015, 10:08:42 pm »
Everything I've learned tells me 72" is too long for sinew.
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Backing?
« Reply #7 on: March 10, 2015, 10:17:54 pm »
There was an outstanding sinew backed yew longbow posted a while back. Don't believe all the myths.  ;)
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Backing?
« Reply #8 on: March 10, 2015, 10:37:16 pm »
A single layer of sinew should give pretty good protection but it more work and probably no better than a rawhide backing.  I would use rawhide unless you wanted a performance backing.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline steve b.

  • Member
  • Posts: 999
Re: Backing?
« Reply #9 on: March 10, 2015, 11:43:24 pm »
I'm with the Pats.  Boo would be great assuming that is an option.  Otherwise, rawhide.  Sinew is only a performance issue on the outer limbs, especially long bows that have, well, alot of outer limb.  So consider rawhide on the outer and sinew 3/4 up the limb.  There is no wood that I would not back once the ring is violated.
« Last Edit: March 10, 2015, 11:59:23 pm by steve b. »
Logged

Offline George Tsoukalas

  • Member
  • Posts: 9,425
    • Traditional and Primitive Archers
Re: Backing?
« Reply #10 on: March 10, 2015, 11:52:10 pm »
Head'em up! Move'em out! Rawhide! :) Jawge
Logged
Set Happens!
If you ain't breakin' you ain't makin!

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,609
Re: Backing?
« Reply #11 on: March 11, 2015, 12:29:44 am »
You are aging your self Roughty Yates.   ;)
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline E. Jensen

  • Member
  • Posts: 481
Re: Backing?
« Reply #12 on: March 11, 2015, 12:34:00 am »
Well I haven't violated anything yet, it just has very tight rings.
Logged

Offline PatM

  • Member
  • Posts: 6,737
Re: Backing?
« Reply #13 on: March 11, 2015, 09:00:16 am »
If you've worked a yew heartwood stave to a single unbroken ring you deserve a medal.
Logged

Offline steve b.

  • Member
  • Posts: 999
Re: Backing?
« Reply #14 on: March 11, 2015, 09:25:54 am »
Out of my league for sure, so I'll just shut up.  Watch........
Logged
Pages: [1] 2
« previous next »