Author Topic: need help spalling a round piece of kentucky blue  (Read 3997 times)

0 Members and 1 Guest are viewing this topic.

Offline beartail

  • Member
  • Posts: 162
need help spalling a round piece of kentucky blue
« on: March 04, 2015, 10:20:56 am »


 


 


 

I have a large cantaloupe size "ball" of Kentucky blue flint.i have never spalled a round cobble like this.where do I start? I need all the directions I can get.dont want to mess this perty rock up!
Modify message

Stringman

  • Guest
Re: need help spalling a round piece of kentucky blue
« Reply #1 on: March 04, 2015, 01:43:50 pm »
If it doesn't already have a conchoidal fracture as a face, then you will just have to smack it...HARD! Probably gonna have to do that anyway. Obviously, certain sides are better than others, but we will need pics to help with that.

Offline Outbackbob48

  • Member
  • Posts: 2,752
Re: need help spalling a round piece of kentucky blue
« Reply #2 on: March 04, 2015, 03:34:59 pm »
I watched James Parker partially bury one rock in the dirt and take the nodule he was going to open, both hands over his head an come down hard more than one hit and crack it in two like a coconut, i believe he called this bipolar reduction, I was just new to knapping and wished I had paid more attention to the details of this. It was pretty impressive and looked like you could lose a finger real easy :( i just had a friend of mine cut one up for me about 1/2" steaks. Bob

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,622
  • Sorry Officer, I was just gathering "materials".
Re: need help spalling a round piece of kentucky blue
« Reply #3 on: March 04, 2015, 05:55:26 pm »
You might want to use a technique call "cobble splitting".  Basically the same as what Bob was describing.  You can either take the cobble and smash it really hard against something else (like a harder stone) or smash the cobble with a sledge hammer or large stone.  Either way, rounded cobbles are really difficult to "crack open" and you will loose some material regardless.
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline mullet

  • Global Moderator
  • Member
  • Posts: 22,897
  • Eddie Parker
Re: need help spalling a round piece of kentucky blue
« Reply #4 on: March 04, 2015, 10:00:52 pm »
If it's the one I just sent, smack it across the tip with a hammer so you can see what you have to work with. Then start skinning the cortex off the sides.
Lakeland, Florida
 If you have to pull the trigger, is it really archery?

Offline TRACY

  • Member
  • Posts: 4,523
Re: need help spalling a round piece of kentucky blue
« Reply #5 on: March 05, 2015, 06:54:28 am »
I use a 3 lb copper billet and place the nodule on the ground and hit towards one end so I can still have some length in spalls. Also allows me to see how thick of cortex I'm dealing with. Set up a platform and start spalling out bigger pieces. Good luck!


Tracy
It is what it is - make the most of it!    PN500956

Offline aaron

  • Member
  • Posts: 1,037
Re: need help spalling a round piece of kentucky blue
« Reply #6 on: March 05, 2015, 01:22:01 pm »
Need a picture of the rock and your biggest bopper
Ilwaco, Washington, USA
"Good wood makes great bows, but bad wood makes great bowyers"

Offline beartail

  • Member
  • Posts: 162
Re: need help spalling a round piece of kentucky blue
« Reply #7 on: March 06, 2015, 08:22:49 am »
I only have a small bopper. I would use a hammer but a hammer leaves fat bulbs. I guess im gonna have to wait till I save up some cash and buy me one. Thay aint cheap!

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,876
  • Keep it flexible
    • Marc's Bows and Arrows
Re: need help spalling a round piece of kentucky blue
« Reply #8 on: March 06, 2015, 09:05:15 am »
What's wrong with a rock?
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline bubby

  • Member
  • Posts: 11,054
Re: need help spalling a round piece of kentucky blue
« Reply #9 on: March 06, 2015, 11:08:19 am »
Bi polar reduction, thats some funny stuff :laugh:
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline JackCrafty

  • Global Moderator
  • Member
  • Posts: 5,622
  • Sorry Officer, I was just gathering "materials".
Re: need help spalling a round piece of kentucky blue
« Reply #10 on: March 06, 2015, 03:09:13 pm »
 ;D
Any critter tastes good with enough butter on it.

Patrick Blank
Midland, Texas
Youtube: JackCrafty, Allergic Hobbit, Patrick Blank

Where's Rock? Public Waterways, Road Cuts, Landscape Supply, Knap-Ins.
How to Cook It?  200° for 24hrs then 275° to 500° for 4hrs (depending on type), Cool for 12hr

Offline beartail

  • Member
  • Posts: 162
Re: need help spalling a round piece of kentucky blue
« Reply #11 on: March 07, 2015, 11:26:42 am »
if you use a rock to spall ,it will leave a large percussion bulb on your flake.and therefor will be harder to thin,at least for me anyhow..

Offline caveman2533

  • Member
  • Posts: 640
  • Steve Nissly
Re: need help spalling a round piece of kentucky blue
« Reply #12 on: March 07, 2015, 11:32:40 am »
The the rock you are spalling with is too hard. use a softer rock.