« previous next »
Pages: [1]

Author Topic: Making a bow from Rose?  (Read 3886 times)

0 Members and 1 Guest are viewing this topic.

Offline markinengland

  • Member
  • Posts: 698
Making a bow from Rose?
« on: January 26, 2008, 02:45:13 pm »
I went out today and came across an interesting bit or wild Rose.



Quite heavily recurved and long enough to make just about any kind of bow. It is 1.5 inches wide and 1.75 inches deep.
Anyone got any experience with Rose as a bow wood? I know some have used it for arrow shafts.
How to dry? What is it good or bad at?
Mark in England
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Making a bow from Rose?
« Reply #1 on: January 26, 2008, 03:45:39 pm »
Mark, I have not used rode wood for bows but I would try it if I had some big enough. I would leave the bark on until dry. Maybe split it, seal the ends and strap it to a form to dry.    Let us know how it works out.     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Marc St Louis

  • Administrator
  • Member
  • Posts: 7,877
  • Keep it flexible
    • Marc's Bows and Arrows
Re: Making a bow from Rose?
« Reply #2 on: January 26, 2008, 05:53:55 pm »
I suspect you are not talking about any species of Rosewood here but the actual wood from a Rose bush. I've never heard of anyone working with it in bow form.
Logged
Home of heat-treating, Corbeil, On.  Canada

Marc@Ironwoodbowyer.com

Offline markinengland

  • Member
  • Posts: 698
Re: Making a bow from Rose?
« Reply #3 on: January 26, 2008, 06:53:55 pm »
Marc,
Yes, this is the stem of a large wild rose bush.
As a boy I used to make quite good kids bows from biggish wild rose stems
Mark in England
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Making a bow from Rose?
« Reply #4 on: January 26, 2008, 06:58:19 pm »
Marc. I would give it a try. The wild rose I have collected for arrows had a tendency to check. Leaving the bark on or taking the stave down to almost bow size and sealing the back would be the way I'd go...probably the latter.     Pat
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline Ryano

  • Member
  • Posts: 3,578
  • Ryan O'Sullivan, North Western Pennsylvania
Re: Making a bow from Rose?
« Reply #5 on: January 27, 2008, 06:35:09 pm »
doesn't it have a pith in the center?
Logged
Its November, I'm gone hunt'in.......
Osage is still better.....
Pages: [1]
« previous next »