« previous next »
Pages: [1]

Author Topic: good easy design for a lam grinder  (Read 1958 times)

0 Members and 1 Guest are viewing this topic.

Offline bow-noob

  • Member
  • Posts: 25
good easy design for a lam grinder
« on: March 14, 2015, 07:07:56 pm »
hi, am wanting to quickly put the rough taper in board bows with a lam grinder type thing, i would also want to make lambs at one point so the same machine would be great. What is some good deisngs you see out there ?
Logged

Offline Badger

  • Member
  • Posts: 8,124
Re: good easy design for a lam grinder
« Reply #1 on: March 14, 2015, 07:18:32 pm »
  I have used tape with a known thickness where I build up layers spacing it about 1 or 2 " where I start each piece of tape. The thicness of the tape and how far I space the lyers will creat the taper I need. I then run it through the planer.
Logged

mikekeswick

  • Guest
Re: good easy design for a lam grinder
« Reply #2 on: March 15, 2015, 03:00:11 am »
Do you mean a drum sander?
What do you mean by designs? Bow designs?
Logged
Pages: [1]
« previous next »