Author Topic: First self bow (BL stave from Wizardgoat)  (Read 14053 times)

0 Members and 1 Guest are viewing this topic.

Offline Treebeard

  • Member
  • Posts: 11
Re: First self bow (BL stave from Wizardgoat)
« Reply #30 on: February 13, 2015, 09:32:15 pm »
Thanks everyone for the kind words and encouragement. I strung and braced her today and found the tiller to be pretty close to where she was before heat treating (lower limb had stiffened a bit more than the upper). Gained about five pounds of draw which I brought back down with some judicious scraping. She draws 56# @27" now and shoots like a dream (so far. It's pouring rain here right now so I had to settle for shooting in the garage). The unbraced pic is immediately after unstringing and shows 1 1/4" of set which relaxes to 3/4" after about 15 minutes. No chrysals thus far, but I suppose I really need to shoot her in before I can say for sure. Thanks again for all the kind words and advice.
Nat
I'm the other guy from Vancouver.

Offline Danzn Bar

  • Member
  • Posts: 4,166
Re: First self bow (BL stave from Wizardgoat)
« Reply #31 on: February 13, 2015, 09:37:07 pm »
+1 Mr. Bent.

 :laugh: Ha...  :laugh: does that make you feel old Greg..... >:D ;) :) coming from a young guy like huisme
By the way very nice looking shorty.....I'm going to try one of those some day.
DBar
« Last Edit: February 13, 2015, 09:56:51 pm by Danzn Bar »
Integrity is doing the right thing when no one is looking

Offline Accipiter

  • Member
  • Posts: 246
Re: First self bow (BL stave from Wizardgoat)
« Reply #32 on: February 13, 2015, 10:22:39 pm »
Wow! Full draw, full weight recurved shorty for a first self bow, pretty damn nice work!

Offline TRACY

  • Member
  • Posts: 4,523
Re: First self bow (BL stave from Wizardgoat)
« Reply #33 on: February 14, 2015, 06:33:41 am »
Looks great ! Just un braced pic looks very acceptable


Tracy
It is what it is - make the most of it!    PN500956

Offline H Rhodes

  • Member
  • Posts: 2,172
Re: First self bow (BL stave from Wizardgoat)
« Reply #34 on: February 14, 2015, 06:26:23 pm »
Nice work.  You got a great bend out of that one!
Howard
Gautier, Mississippi

Offline huisme

  • Member
  • Posts: 1,036
  • I'm Marc, but not that Marc.
Re: First self bow (BL stave from Wizardgoat)
« Reply #35 on: February 14, 2015, 08:16:46 pm »
That's exactly how that bow should look, you pulled it out of the stave just right ;) ;D

Make another one >:D
50#@26"
Black locust. Black locust everywhere.
Mollegabets all day long.
Might as well make them short, save some wood to keep warm.

Offline Treebeard

  • Member
  • Posts: 11
Re: First self bow (BL stave from Wizardgoat)
« Reply #36 on: February 15, 2015, 07:30:23 pm »
Thanks everyone for the kind words.
Had a fun afternoon shooting arrows with Ryan, his wife and a few of their friends.
Since finishing, I've put about 150+ arrows through her and she's showing no frets and takes about an inch and a quarter of set.
Got some much needed photography tips, so here she is;
I'm the other guy from Vancouver.

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: First self bow (BL stave from Wizardgoat)
« Reply #37 on: February 16, 2015, 01:26:17 pm »
Turned out good Nathan, that was a fun shoot

Offline PAHunter

  • Member
  • Posts: 677
  • "If your not having fun, what's the point?" - Khan
    • Victory Before Combat (My YouTube Page)
Re: First self bow (BL stave from Wizardgoat)
« Reply #38 on: February 16, 2015, 02:05:55 pm »
First selfbow?!  Wow can't wait to see your second.  Good work man! 
Thanks,
Rob - Wexford, PA

"Give me six hours to chop down a tree and I will spend the first four sharpening the axe". - Abe Lincoln

Offline ajooter

  • Member
  • Posts: 1,234
Re: First self bow (BL stave from Wizardgoat)
« Reply #39 on: February 16, 2015, 02:36:16 pm »
That's grip is sick man...really dig it.  The bow ain't bad either  :).  Grear job on your first one!

Offline Springbuck

  • Member
  • Posts: 1,545
Re: First self bow (BL stave from Wizardgoat)
« Reply #40 on: February 16, 2015, 04:11:22 pm »
  That is astounding execution in both design and tiller for your first from a stave.

Offline Treebeard

  • Member
  • Posts: 11
Re: First self bow (BL stave from Wizardgoat)
« Reply #41 on: February 16, 2015, 11:53:49 pm »
You all are far too kind. Thanks again for the kind words. Special thanks are owed to Ryan for not only the stave itself, but also the extensive guidance and tillering advice. I'm sure you're sick of my texts by now. Just wait until that yew stave is dry. You'll never hear the end of me then  >:D
I'm the other guy from Vancouver.

Offline Drewster

  • Member
  • Posts: 687
Re: First self bow (BL stave from Wizardgoat)
« Reply #42 on: February 17, 2015, 12:17:24 am »
I'm impressed.  Even with Ryan's tutoring, that's still a heck of a nice job for your first stave bow.  Keep it going.  We'll be watching for the second one.
Drew - Boone, NC