« previous next »
Pages: 1 2 [3] 4 5 ... 15

Author Topic: sidewinder buildalong  (Read 54082 times)

0 Members and 2 Guests are viewing this topic.

Offline Stixnstones

  • Member
  • Posts: 1,695
Re: sidewinder buildalong
« Reply #30 on: February 18, 2015, 01:45:37 pm »
On a second look, looks like ur leavin extra material for those knots, so never mind previous post
Logged
DevilsBeachSelfbows

Offline Puckaway

  • Member
  • Posts: 87
Re: sidewinder buildalong
« Reply #31 on: February 18, 2015, 03:27:02 pm »
Yup. The only extra material was around knots, and I'm going to clean them up before I go farther. Thanks for the tips guys. I took the sides down near 1 3/4 on account of that was my narrowest point. I'll heed your advice and go for an unbacked bow and do the best I can. This is new territory for this WI. boy. Stay tuned.
Logged

Offline JonW

  • Member
  • Posts: 1,906
Re: sidewinder buildalong
« Reply #32 on: February 18, 2015, 07:11:47 pm »
That is a killer stave ya got there Puck. 1 1/2" wide is good to start with and you will prolly finish narrower. Do your part and that will make a nice bow.
Logged

Offline alwayslookin

  • Member
  • Posts: 350
Re: sidewinder buildalong
« Reply #33 on: February 18, 2015, 07:44:14 pm »
Need some counseling on my stave. It's pretty narrow and not very deep on one end. I plan on backing it with rawhide. What do you guys think? Also the one big knot in the picture should I cut it out or  can you rawhide over holes? It's my first Osage so I just wanna make sure I get a bow outta her. Thanks again Danny!
Logged
In all your ways acknowledge  him and he will make your paths straight.

Offline alwayslookin

  • Member
  • Posts: 350
Re: sidewinder buildalong
« Reply #34 on: February 18, 2015, 07:46:52 pm »
Sorry forgot the pics
Logged
In all your ways acknowledge  him and he will make your paths straight.

Offline alwayslookin

  • Member
  • Posts: 350
Re: sidewinder buildalong
« Reply #35 on: February 18, 2015, 07:47:55 pm »
Big knot
Logged
In all your ways acknowledge  him and he will make your paths straight.

Offline alwayslookin

  • Member
  • Posts: 350
Re: sidewinder buildalong
« Reply #36 on: February 18, 2015, 07:49:01 pm »
About a inch thick maybe a hair less on this small end.
Logged
In all your ways acknowledge  him and he will make your paths straight.

Offline Sidewinder

  • Member
  • Posts: 1,946
Re: sidewinder buildalong
« Reply #37 on: February 18, 2015, 08:02:26 pm »
Puck,
Give us a ring shot from the end. Also what is most important is it deep enough in the middle for a handle area? 1" on the thin end is more than enough at the tips.
Logged
"You know a tree by the fruit it bears"   God

Offline jeffp51

  • Member
  • Posts: 1,640
Re: sidewinder buildalong
« Reply #38 on: February 18, 2015, 08:03:22 pm »
I am certainly no expert, and so other opinions are probably more valuable, but it looks to me like going around it, following the grain should make a nice snakey bit.  if it is near the center, then it may make for a center-shot bow.
Logged

Offline ajooter

  • Member
  • Posts: 1,234
Re: sidewinder buildalong
« Reply #39 on: February 18, 2015, 08:37:17 pm »
Can't wait to get mine!! I'll be posting some pics as I go along as well.
Logged

Offline alwayslookin

  • Member
  • Posts: 350
Re: sidewinder buildalong
« Reply #40 on: February 18, 2015, 08:52:51 pm »
Quote from: jeffp51 on February 18, 2015, 08:03:22 pm
I am certainly no expert, and so other opinions are probably more valuable, but it looks to me like going around it, following the grain should make a nice snakey bit.  if it is near the center, then it may make for a center-shot bow.
are you saying to go around it by leaving it in?
Logged
In all your ways acknowledge  him and he will make your paths straight.

Offline jeffp51

  • Member
  • Posts: 1,640
Re: sidewinder buildalong
« Reply #41 on: February 18, 2015, 09:29:25 pm »
I was thinking cut it out, but it is hard to tell what that would leave you.
Logged

Offline alwayslookin

  • Member
  • Posts: 350
Re: sidewinder buildalong
« Reply #42 on: February 18, 2015, 10:00:18 pm »
That was my thoughts. The wood on the back side of the knot is super thin.
Logged
In all your ways acknowledge  him and he will make your paths straight.

Offline IdahoMatt

  • Member
  • Posts: 2,093
Re: sidewinder buildalong
« Reply #43 on: February 18, 2015, 11:00:03 pm »
I got mine today.  Thanks again Danny.  I will get some pics up soon. :)
Logged

Offline Scottski

  • Member
  • Posts: 462
Re: sidewinder buildalong
« Reply #44 on: February 19, 2015, 08:44:00 am »
I didn't get a stave but I think I am going to learn a lot by keeping up with all of this very kool idea.
Logged
Did the Native Americans think about all this that much or just do it?
Pages: 1 2 [3] 4 5 ... 15
« previous next »