Author Topic: 2015 Primitive Archer bow trade works in progress  (Read 367885 times)

0 Members and 1 Guest are viewing this topic.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: 2015 Primitive Archer bow trade works in progress
« Reply #585 on: July 14, 2015, 11:51:48 am »
Thanks bob, started with way too much wood but it's coming along. Made it a bit longer for what I usually make my bows, ipe and I have not saw eye to eye yet. Limb to mouth but not eye. Just going reallllllly slow.
Nothing ventured nothing gained

Offline KellyG

  • Member
  • Posts: 165
Re: 2015 Primitive Archer bow trade works in progress
« Reply #586 on: July 14, 2015, 12:23:34 pm »
Sleek not to full brace yet. The last 2 evenings I have been helping a buddy pack. So no scrapping going on for me.

Offline Mo_coon-catcher

  • Member
  • Posts: 1,347
Re: 2015 Primitive Archer bow trade works in progress
« Reply #587 on: July 14, 2015, 01:58:25 pm »
Got it bending how I want it and got rid of a little thump. It didn't turn out as under weight as I initially expected, it's shy of my goal weight by about 3 pounds. I have all the doodling marked out in pencil so tonight I'm going to ink over it. There is finish on all but the belly so just gotta get a few coats on the belly and one or two over the whole thing to clean it up. I'm not happy with the color of the leather and the fit, so I'm going to pull it off and smoke it more to see if I can darken it up some. The. Te stitch it on a little tighter. I'm happy with how the beaver tail arrow pass turned out though. I should be shipping in a week once all the finish is done drying. 

Kyle

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Re: 2015 Primitive Archer bow trade works in progress
« Reply #588 on: July 14, 2015, 08:25:43 pm »
Some beautiful projects on here! E.Jensen, don't second-guess good shooting. If it shoots well and doesn't break, then the wood is willing. I only fix gross alignment problems, or if the string hangs off the wrong side of the bow. My current shooter yew bow has a touch of propeller on the top limb, but the moose I killed with it never complained about that.
Nothing flying, Nothing dying

Offline E. Jensen

  • Member
  • Posts: 481
Re: 2015 Primitive Archer bow trade works in progress
« Reply #589 on: July 14, 2015, 08:34:49 pm »
Thanks Chadwick.  I might switch it to the other side, that way I only lose 1/4" length.  I also think I'm going to build a new string without the double served loops so it'll fit on the nocks better.  Currently they look precarious.

Offline duke3192

  • Member
  • Posts: 195
  • pm109331
Re: 2015 Primitive Archer bow trade works in progress
« Reply #590 on: July 14, 2015, 08:47:39 pm »
Bruce, Re: take down, coat the inside lightly with a product called neversieze, it is the slipperest stuff you've ever tried to get off your hands, get it at Ace or any industrial supply.
charter member of traditional bow hunters of Florida.

Offline alwayslookin

  • Member
  • Posts: 350
Re: 2015 Primitive Archer bow trade works in progress
« Reply #591 on: July 14, 2015, 09:20:39 pm »
Coon catcher that thing is super cool I live snakey bows.
In all your ways acknowledge  him and he will make your paths straight.

Offline bubbles

  • Member
  • Posts: 932
  • PM110769
Re: 2015 Primitive Archer bow trade works in progress
« Reply #592 on: July 14, 2015, 11:42:03 pm »
There are some sweet wiggles in that one!

Offline jeffp51

  • Member
  • Posts: 1,641
Re: 2015 Primitive Archer bow trade works in progress
« Reply #593 on: July 15, 2015, 09:32:20 pm »
I am getting frustrated.  this was about plan c or d. There were no apparent flaws in the wood at this point.  The crack happened while trying to get it to low brace @ less than 40lbs.  If I need to post in a separate topic, let me know.

Offline bubby

  • Member
  • Posts: 11,054
Re: 2015 Primitive Archer bow trade works in progress
« Reply #594 on: July 15, 2015, 09:34:00 pm »
OUCH!!!!
failure is an option, everyone fails, it's how you handle it that matters.
The few the proud the 27🏹

Offline sleek

  • Member
  • Posts: 6,745
Re: 2015 Primitive Archer bow trade works in progress
« Reply #595 on: July 15, 2015, 09:39:56 pm »
Jeff, start a new topic and show the bow, its dimensions, stats etc.... pics help. Also wood type and heat treat or no and design.
Tread softly and carry a bent stick.

Dont seek your happiness through the approval of others

Offline E. Jensen

  • Member
  • Posts: 481
Re: 2015 Primitive Archer bow trade works in progress
« Reply #596 on: July 15, 2015, 10:57:06 pm »
As per my twisted tip, it does not seem to be twisting any more when drawn, so I might leave it as is, as long as my recipient is not appalled!  Now the question is, how to make it pretty?  A plain white bow is boring, too reflective for hunting, and will look dirty.

Offline Blaflair2

  • Member
  • Posts: 2,042
Re: 2015 Primitive Archer bow trade works in progress
« Reply #597 on: July 16, 2015, 11:07:47 am »
Give it the old vinegar and steel wool. It will go black if u do enough
Nothing ventured nothing gained

Offline Chadwick

  • Member
  • Posts: 161
  • Knock off everything that ain't a bow.
    • Primal Archery
Re: 2015 Primitive Archer bow trade works in progress
« Reply #598 on: July 16, 2015, 01:09:39 pm »
Plain white is boring. Unless you can show cool grain swirls or something. At the same time, don't worry about darkening it for hunting. My opinion, but I've hunted a lot with a shiny red white and blue bow, and I can absolutely tell you that the bow never spooked an animal, it was always me. If you want it pretty, remove all tool marks and put on a finish to make it pop.

Do we have a list of who's received their bows?
Nothing flying, Nothing dying

Offline wizardgoat

  • Member
  • Posts: 2,397
Re: 2015 Primitive Archer bow trade works in progress
« Reply #599 on: July 16, 2015, 01:25:12 pm »
I received an awesome elm bow from bushboy. I'll get some pics up this weekend