Author Topic: ring chasing on hhb?  (Read 2245 times)

0 Members and 1 Guest are viewing this topic.

Offline Tyke

  • Member
  • Posts: 343
ring chasing on hhb?
« on: February 05, 2015, 07:45:37 pm »
Ireceived some HHB from auggie today a presawn pyramid to be precise.my question is the back has checked a little so what should i watch out for on chasing a ring? Thanks for your replies.  :D
why buy it when you can build it

Offline Auggie

  • Member
  • Posts: 652
  • redneck engineer
Re: ring chasing on hhb?
« Reply #1 on: February 05, 2015, 07:53:33 pm »
I say dont unless you want a frickin bad headache. hhb isnt ring chasing friendly, some super glue here& there and it shouldnt be a big deal.
laugh. its good for ya

Offline half eye

  • Member
  • Posts: 3,300
Re: ring chasing on hhb?
« Reply #2 on: February 05, 2015, 08:09:15 pm »
I have made a lot of ironwood stave bows, some of it was very old and weathered and even dead standing (lots of drying checks) you dont have to worry about them. If you like I'll take some photos to show the point, and if you really are still woried, superglue them. If they dont run off the edge you are all set.

If you chase a ring (try to, that is) good luck bud.
rich

Offline bushboy

  • Member
  • Posts: 2,256
Re: ring chasing on hhb?
« Reply #3 on: February 05, 2015, 08:15:11 pm »
The rings are half as thick a thin onion slice.
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline bushboy

  • Member
  • Posts: 2,256
Re: ring chasing on hhb?
« Reply #4 on: February 05, 2015, 08:16:11 pm »
Sorry peel!lol!
Some like motorboats,I like kayaks,some like guns,I like bows,but not the wheelie type.

Offline Tyke

  • Member
  • Posts: 343
Re: ring chasing on hhb?
« Reply #5 on: February 05, 2015, 08:24:39 pm »
Thanks fellas this was just my first HHB. Auggie yo da man
why buy it when you can build it

Offline Springbuck

  • Member
  • Posts: 1,545
Re: ring chasing on hhb?
« Reply #6 on: February 06, 2015, 04:27:23 pm »
  Small, very longitudinal chesks on a back often survive.  Get it shot in, superglue and wrap it to keep it from spreading.