« previous next »
Pages: 1 2 [3]

Author Topic: Curly osage bow finished  (Read 7708 times)

0 Members and 1 Guest are viewing this topic.

Offline Pappy

  • Global Moderator
  • Member
  • Posts: 32,204
  • if you have to ask you wouldn't understand ,Tenn.
Re: Curly osage bow finished
« Reply #30 on: February 06, 2015, 05:22:04 am »
Same happened to mine Clint, I still have 1 good half if you got the other. :)
   Pappy
Logged
Clarksville,Tennessee
TwinOaks Bowhunters
Life is Good

Offline chamookman

  • Member
  • Posts: 3,027
Re: Curly osage bow finished
« Reply #31 on: February 06, 2015, 06:47:57 am »
Bummer Bud. One of those limbs would make a COOL Atlatl. Bob
Logged
"May the Gods give Us the strength to draw the string to the cheek, the arrow to the barb and loose the flying shaft, so long as life may last." Saxon Pope - 1923.

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Curly osage bow finished
« Reply #32 on: February 06, 2015, 07:59:16 am »
Quote from: Hamish on February 06, 2015, 03:26:26 am
Hi OO, Just curious to what the dimensions (width and length) were? I have seen some curly wood bows survive, and others that break in tension or chrysal.
                                                                                                      Hamish.

I can get the exact measurements later today.  I know I made it wider than I normally do for osage.
Logged
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Curly osage bow finished
« Reply #33 on: February 06, 2015, 08:00:58 am »
Quote from: Pappy on February 06, 2015, 05:22:04 am
Same happened to mine Clint, I still have 1 good half if you got the other. :)
   Pappy

I'm not going to bother trying to bend any more of it Pappy.  I just think its not worth messing with as a selfbow.
Logged
I started out with nothin' and I still got most of it left

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Curly osage bow finished
« Reply #34 on: February 06, 2015, 10:01:39 am »
Quote from: Hamish on February 06, 2015, 03:26:26 am
Hi OO, Just curious to what the dimensions (width and length) were? I have seen some curly wood bows survive, and others that break in tension or chrysal.
                                                                                                      Hamish.


It was 63.5" long, 1.5" wide to mid limb, and just about 1/2" thick where it broke. 
Logged
I started out with nothin' and I still got most of it left

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: Curly osage bow finished
« Reply #35 on: February 06, 2015, 12:48:33 pm »
I knew you were starting to have your doubts about it at the Classic.  Sure was pretty wood.
Logged
Greg Sulfridge, Lafollette, TN

Offline Springbuck

  • Member
  • Posts: 1,545
Re: Curly osage bow finished
« Reply #36 on: February 06, 2015, 04:10:46 pm »
  That is weird.  I would have though that a well established ring on the back would have prevented that, despite the grain.  It wiggles but mostly forrlows the general grain perfectly, from what I can see.

  I have some BL like that and now I'm slightly intimidated, although the wood feels solid as a rock and heavy.
Logged
Pages: 1 2 [3]
« previous next »