What do i do with this ?

[mikekeswick]

Epoxy , epoxy, epoxy forget superglue it's just not meant for this application. Superglue is brittle when cured and this area will be subject to a tiny bit of bending and a lot of shear.
Get some good epoxy and heat it gently it will flow just like thin superglue, also a little gentle flexing , letting gravity help will get plenty of glue in there no problem.
If glued well why would it NOT hold? Think about what forces are acting on it.

[H Rhodes]

I would super glue and clamp as Badger said, you are pulling it tighter as you string and draw, it should be fine, seen a lot that happened to. It will almost always happen if they have a hump in the handle. :)The wrap sure won't hurt but I don't think it is necessary. 
  Pappy

X 2.