« previous next »
Pages: [1]

Author Topic: Sinew Backing Osage Question  (Read 1467 times)

0 Members and 1 Guest are viewing this topic.

Offline BrokenArrow

  • Member
  • Posts: 168
Sinew Backing Osage Question
« on: January 26, 2015, 04:09:49 pm »
I am getting close to sinew backing an osage orange 45 inch re-curved bow that has one thick growth ring as its back.
Should I score the ring first or just put the sinew on the smooth ring surface?

Thanks
Logged

Offline PEARL DRUMS

  • Member
  • Posts: 14,079
  • }}}--CK-->
Re: Sinew Backing Osage Question
« Reply #1 on: January 26, 2015, 04:12:07 pm »
I hit mine with 60 grit lightly. I don't degrease the back either. I use quality homemade hide glue.
Logged
Only when the last tree has died and the last river has been poisoned and the last fish has been caught will we realize we cannot eat money.

Offline bradsmith2010

  • Member
  • Posts: 5,187
Re: Sinew Backing Osage Question
« Reply #2 on: January 26, 2015, 05:09:45 pm »
I think degreasing the back is a good idea,,, even when putting rawhide
as far as scoring the back,, I have always done that with positive results,,,, but have read it might no be necessary,,, :)
Logged

Offline IndianGuy

  • Member
  • Posts: 289
Re: Sinew Backing Osage Question
« Reply #3 on: January 26, 2015, 05:11:17 pm »
Yes take an awl and score the back with a cross hatch pattern, then before applying sinew run a layer of hide glue over the scoring this will fill in the grooves and give you a layer that will help adhere your hide glue soaked sinew to the bows back.
E
Logged
Pages: [1]
« previous next »