Author Topic: Steam Shark  (Read 2253 times)

0 Members and 1 Guest are viewing this topic.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Steam Shark
« on: January 24, 2015, 01:51:23 pm »
nyone ever use a Steam Shark for wood steaming? Just picked on up for $20
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline DC

  • Member
  • Posts: 10,396
Re: Steam Shark
« Reply #1 on: January 24, 2015, 02:32:25 pm »
If it pumps out hot steam(redundant,I know) it will work. I use a Conair garment steamer. The only concern is it's capacity. If I fill my Conair way past the "max fill" I can get an hour of steam. For all round use I think you need at least that long. I you can only get 1/2 hour of steam it might fall a little short.

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Steam Shark
« Reply #2 on: January 24, 2015, 02:38:24 pm »
I just cleaned my shower with it.  >:D It puts out some steam. I used it for about 15 minutes with no noticeable water loss. I'll give it a shot. If all else fails I'll lust use it for cleaning.   >:(
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline DC

  • Member
  • Posts: 10,396
Re: Steam Shark
« Reply #3 on: January 24, 2015, 02:44:54 pm »
Fill it right up and let it boil dry. See how long it takes. Nothing worse than running out of steam :D