« previous next »
Pages: [1]

Author Topic: Can you re-glue sanding belts?  (Read 7589 times)

0 Members and 1 Guest are viewing this topic.

Offline osage outlaw

  • Member
  • Posts: 11,962
Can you re-glue sanding belts?
« on: January 16, 2015, 03:20:17 pm »
I'm about to trade for a grizzly belt sander and it comes with a bunch of belts.  On most of them the glue on the joint has let go.  I'm guessing they are pretty old but in good shape besides the joint.  Can you re-glue them?  If so what glue should I use?  I would hate to throw a dozen belts away.
Logged
I started out with nothin' and I still got most of it left

Offline skarhand

  • Member
  • Posts: 180
Re: Can you re-glue sanding belts?
« Reply #1 on: January 16, 2015, 03:31:23 pm »
I would think that gorilla glue or contact cement would work, but I have never tried it so no guarantee from me, LOL.

There shouldn't be a tremendous amount of strain applied to the glue joint since the pressure is applied perpendicular to the  joint and with the plate behind it supporting it. The glue just need to hold the belt together.

Others may have first hand experience with it though. Although my thought is there is no harm in trying. Worse that happens is it doesn't work. I don't think it would be dangerous like trying to mend a band saw blade or something.
Logged

Offline Aaron H

  • Member
  • Posts: 3,437
Re: Can you re-glue sanding belts?
« Reply #2 on: January 16, 2015, 04:52:43 pm »
Just duct tape em, they'll be fine
Logged

Offline Tyke

  • Member
  • Posts: 343
Re: Can you re-glue sanding belts?
« Reply #3 on: January 16, 2015, 04:55:31 pm »
Im w/skarhand on this one gorilla epoxy its strong and flexible
Logged
why buy it when you can build it

Offline Stoker

  • Member
  • Posts: 1,729
Re: Can you re-glue sanding belts?
« Reply #4 on: January 16, 2015, 05:00:56 pm »
Contact cement and tuck(red) poly tape for vapour barrier.. Used it lots works good
Thanks Leroy
Logged
Bacon is food DUCT tape - Cipriano

Offline Chippintuff

  • Member
  • Posts: 777
Re: Can you re-glue sanding belts?
« Reply #5 on: January 16, 2015, 07:14:21 pm »
I had one come apart some time back. It has a cloth back. I applied a little epoxy to it, sandwiched it between two sawed rocks and let it sit for 24 hrs. It is working fine.

WA
Logged

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Can you re-glue sanding belts?
« Reply #6 on: January 16, 2015, 09:59:29 pm »
Thanks.  Do you think superglue would work?  I have some gorilla epoxy I could use. 
Logged
I started out with nothin' and I still got most of it left

Offline JoJoDapyro

  • Member
  • Posts: 2,504
  • Subscription Number PM109294
Re: Can you re-glue sanding belts?
« Reply #7 on: January 17, 2015, 09:08:33 am »
I have tried super glue on sanding drums. Heat makes the glue fail. With a larger area you may be ok.
Logged
If you always do what you always did you'll always get what you always got.
27 inch draw, right handed. Bow building and Knapping.

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,633
Re: Can you re-glue sanding belts?
« Reply #8 on: January 17, 2015, 10:50:06 am »
Clint, I'd be afraid to try re-gluing the belts. If the joint comes apart at high speed it could injure you.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Can you re-glue sanding belts?
« Reply #9 on: January 17, 2015, 11:02:36 am »
I'm willing to give it a try Pat.  I'll wear something to protect my important parts  ;D  If I show up at the classic covered in road rash you will know that they didn't hold up.
Logged
I started out with nothin' and I still got most of it left

Offline DC

  • Member
  • Posts: 10,396
Re: Can you re-glue sanding belts?
« Reply #10 on: January 17, 2015, 01:44:13 pm »
I would unplug it, put the belt on, turn the switch on, stand aside and then plug it in. Let it run for an undetermined time. Sounds risky to me. Trying to get an accurate glue joint may be tough too. If it's cocked off to one side, even a bit, it will never run true.
Logged

Offline Gsulfridge

  • Member
  • Posts: 1,573
Re: Can you re-glue sanding belts?
« Reply #11 on: January 19, 2015, 08:04:46 am »
Quote from: osage outlaw on January 17, 2015, 11:02:36 am
I'm willing to give it a try Pat.  I'll wear something to protect my important parts  ;D  If I show up at the classic covered in road rash you will know that they didn't hold up.
HA!!  Hope that don't happen.
Logged
Greg Sulfridge, Lafollette, TN
Pages: [1]
« previous next »