« previous next »
Pages: [1]

Author Topic: Straightening Feathers  (Read 2337 times)

0 Members and 1 Guest are viewing this topic.

Offline DC

  • Member
  • Posts: 10,396
Straightening Feathers
« on: January 12, 2015, 02:43:27 pm »
Do any of you straighten your feathers? Some of mine have enough bend in the quill so they don't sit straight in the clamp to grind them. I've steamed a few of them and straightened them. It works much better. Is it causing any harm do you think?
Logged

Offline Benedikt

  • Member
  • Posts: 95
Re: Straightening Feathers
« Reply #1 on: January 12, 2015, 02:55:01 pm »
Just grind down your quill a bit and everything's fine ;)
Logged
A dream is not reality, but who is to say which is which?

Offline osage outlaw

  • Member
  • Posts: 11,962
Re: Straightening Feathers
« Reply #2 on: January 12, 2015, 03:26:05 pm »
I trim the quill with scissors before I grind them
Logged
I started out with nothin' and I still got most of it left

Offline elwinbm

  • Member
  • Posts: 7
Re: Straightening Feathers
« Reply #3 on: January 12, 2015, 04:35:25 pm »
Hello i am elwinbm been a way with operation shoulder ,but all right and back to archery
What I would like to find is a pair of scissors long ones for cutting feathers
And where can I get those wooden nooks for bamboo arrows .it called bush clover
Thanks
Elwinbm  :) 8)
 
Logged

Offline Pat B

  • Administrator
  • Member
  • Posts: 37,617
Re: Straightening Feathers
« Reply #4 on: January 12, 2015, 06:29:06 pm »
Elwin, Just cut self nocks in the cane and add a sinew or thread wrap below it. That's how I make them and have for a long time.
DC, if the quill is thin enough the fletch should cooperate.
Logged
Make the most of all that comes and the least of all that goes!    Pat Brennan  Brevard, NC
Pages: [1]
« previous next »