Main Discussion Area > Flight Bows
a poor attempt ( now with fd curve )
blackhawk:
These designs take a few tries and then some to get somewhat right and dialed in. I've made some,and still feel like I have some room for improvement with them. Soooo....keep on keeping on. Learn from this one,adjust,and try again and again. You put forth a good effort here,and I wouldn't call it a poor attempt.
Del the cat:
What a swizz... I expected a curve... not a string of numbers >:( ;).
So... I've plotted it for you :) (courtesy of Excel and paint)
It's pretty linear, within the limits of measurement error.
Initial draw weight comes up fairly quick rather than being a straight line from zero. E.G the main straight line, if extended crosses the zero draw line at about 6#. In reality there is obviously zero pounds at zero draw, but presumably this is some sort of indication of the stored energy at brace?
Del
leehongyi:
it seems that the deformation concentrates on the areas near handle,which would result in over compression of fiber
Navigation
[0] Message Index
[*] Previous page
Go to full version